My lg musicflows6 is stuck on please wait.please how can i solve this problem.

did you try unplugging it, waiting 30 seconds, and plugging it back in?

I had the same issue twice (2 diffrent devices) on LG Blue-ray HX-906 - stuck on "please wait" after switching it on. It turned out to be defective mainboard - main BGA chip (the one with black radiator) has some problem with connection to mainboard. Here is how to repair it:

- dismount the mainboard

- take off the radiator from the main chip

- put alluminium foil around the chip to avoid unnecessary heating up of other parts of PCB

- heat up the chip using air hotgun to about 200 celsius for about 5 minutes.

Mount everything in reverse order and enjoy

The problem is associated with the Laser / Drive Mechanism.

I take it they told you to :-

1) Unplug and leave for a few minutes.

2) With the On/Off Button Pressed, Plug in and wait for the unit to reset.

If you've done this and still get the same fault then it requires further investigation by an engineer but not necessarily an LG one.

Hi Dan. Perhaps the laser lens is dirty. Get a cleaning disk from Poundland. Should sort it out

Hi,
This is problem of optical lens that got stuck in mid position due to its defective sled motor.
Optical block will be replaced to solve 'please wait' problem in your Sony home theater system.
Let me know if you have additional question.
Thanks.

you need to replace either the mpeg pcb or the dvd loader assy.

Your lens is surely dirty, try cleanign ur lens, nothing else there to do for you.

It's Loose contact Problem in Vertical section

Pl corrected dry points all over the vertical section.

Hi there,

I had a RH 178 with the same problem. I opened case and removed the plate with the 2 drive cables and the front lcd cable. Simply wait a few mins and plug it back in, connect the 3 cables and use the 4 srews and VOILA it runs!!

No more "please Wait"

I think it was a connection problem with the "uplink" to mainboard (not the three drive cables and LCD). Can someone please report if it works with his LG?


greets proliant

Hey Riya Love,

If I understand you, the LG Combo doesn't transmit music to the speakers. If this is so, then you most probably forgot to connect a lead audio cable from the COMBO to the SOUND port inside your mother board. This cable is most probably still stuck onto the sound port, and the other end hanging loose inside waiting to be plugged intothe COMBO output port. This port is betweenthe power plug and the jumper ports on the COMBO.

Just open the case and do it Riya. Come back if it doesn't solve it.