I just bought a used Kodak ESP 3250 all in one printer and it says paper jam when the paper starts to go in my printer it goes to the right side and Jams

SOURCE: Printer feeding paper uneven and jamming

My proposed solution was given to me by a Lexmark Tech. It applies to 4350 and 4850.

1. Under the Control Panel, choose Add Remove Program
2. Repair Microsoft Framework 2.0
3. Load MSCONFIG
4. Choose Selective Startup -- you will need to restart the computer
5. Uncheck Loadup Start Items -- too allow the complete program to load
6. Uninstall Lexmark
7. Reboot
8. Install Lexmark files from support.lexmark.com

SOURCE: Paper feeds to the right and Jams

Sounds to me like there is something in the paper chanel, a staple, paper clip or something small enough to get in there. Have you tried turning the printer upside down and lightly tapping the side to see if anything falls out?

SOURCE: HP 6200 all-in-one --paper jam problem

Hi,

Check side ADF grips are correctly setup, paper tray is not mis-aligned, remove if poss, and replace to check.

check you printer's properties paper size is set correct for the paper used,

open the back door check for loose particles or paper,
remove slowly.

4 x Feed rollers in the back, revolve and clean with distilled water.
wait till dry, try printing again

Disconnect the power cord from the product.
Press and hold # and 3 while reconnecting the power cord.
When reset displays, release both buttons.
Try printing again.

Hope this helps
Regards.

Clive

• 4362 Answers
• Posted on Mar 16, 2010

SOURCE: Starts to print but jams on left side.

Hello there
You may not see a paper jam.

This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

SOURCE: Kodak ESP 3250 won't print black. Changed

I fixed my ESP 3250 print problems by removing the cartridges and print head. Using a Q-tip and warm water, added drops of water to each of the print head ink wells until the water / ink from the wells bled thru onto a cleanex. Did this several times. Dryed the print head fairly well. Then added a drop of water to each cartridge for each color. Reasembled and ran an alignment and to my surprise, it works! I hadn't used my printer in a while, so the ink had dryed on the felt for both the print head and cartridges.......