Remington Polesaw Wizard Logo
Posted on Aug 08, 2009

What type of oil I use

What type of oil should I use

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 12 Answers
  • Posted on Aug 09, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Aug 04, 2009
Answers
12
Questions
0
Helped
4675
Points
37

The Remington manual for model 111409-01 states: "This Pole Saw requires lubrication only to prevent rust on the guide bar and saw chain. The saw chain provided is pre-lubricated at the factory. With each use of the Pole Saw apply a small amount of lubricating oil directly to the saw chain (see Figure 8). The oil will distribute itself around the chain and guide bar groove during use?preventing rust. We recommend using SAE #30 motor oil for lubrication and rust prevention."

Bradley Chandler

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 6 Answers
  • Posted on Jan 17, 2015
Bradley Chandler
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Problem Solver:

An expert who has answered 5 questions.

Joined: Jan 17, 2015
Answers
6
Questions
0
Helped
1742
Points
30

It's always safe to follow your owner's manual for motor oil recommendations, or ask an expert, like a Levin Tire advisor. If you've been using conventional engine oil and are interested in switching to synthetic or synthetic blend engine oil and your car is still under warranty, make sure your warranty cover's the use of all engine oils before you make the switch.No matter which type of engine oil you use, it is important that oil changes are done regularly. The time frame can vary depending on the type of engine, type of oil used, driving habits and climate. Home FDJohnson

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have seen conflicting info about the correct oil to use for the ‘09 Civic Hybrid. Could you answer, and direct me to this answer on the Honda site? Thanks much!

2009 Honda Civic
L4-1.3L Hybrid

Fluid Types


  • Vehicle
  • Engine, Cooling and Exhaust
  • Engine
  • Engine Lubrication
  • Engine Oil
  • Specifications
  • Fluid Types
FLUID TYPES
Engine Oil

Type .................... API Premium Grade 0W-20 Detergent Oil

A 5W-20 oil may be used if 0W-20 is not available.

You may use a synthetic oil if it meets the same requirements given for a conventional motor oil: it displays the API certification seal, and is the proper wei
2helpful
2answers

What type of oil to use on a empisal d 270 and how put the oil

sewing machine oil ( from a supermarket or sewing shop)and just a few drops in the oil holes
0helpful
1answer

Can hydro oil be changed and what type oil on Swisher ZT2460 mower?

yes hydro oil can be changed and should be at regular intervals, the manual should tell you how often and the type of oil to use for best lifespan.
good luck.
8helpful
2answers

What type of oil does a 2002 jaguar x-type take? I was never given a manual.

The car takes 5w-30 semi synthetic oil. However, if you have never put synthetic oil in the car I would recommend using regular oil. I would also advise you check with your local jaguar dealer. The reason for this is if your car is not use to that kind of oil from day one it could cause seal leaks.
0helpful
1answer

I need to know which oil type goes into the oil chamber for the chain on a mac 3200 gas chainsaw, not the mixture...thanks

There really is no exact type of oil that goes into the chain and bar oiler. Each manufacturer usually makes their own, but any chain and bar oil will work. It is a thicker type of oil unlike a motor oil. Just ensure that the bottle says "bar and chain" oil
0helpful
1answer

What are the advantages of dry type over oil type transformers

The dry type doesn't leak oil. Oil types tend to be better insulated due to the impregnation of the windings with oil and may self-recover from an internal arc-over. The dry type has a smaller package due to no oil, but doesn't dissipate heat as well. The dry type tends to be cheaper in price. Hope this helps!
Nov 27, 2010 • Garden
3helpful
1answer

What oil type to use when changing engine oil in a c50 boulevard?

Standard oil to use id SAE10W30 or SAE 10W40.
If you are still in doubt go to your local motorcycle dealer and ask the question as the normally are willing to tell you the oil type for your particular bike. Good enough?
May 21, 2010 • Motorcycles
0helpful
2answers

I CANT HAVE THE FACTORY OIL TYPE IN MY COUNTRY, CAN I USE ANOTHER TYPE? AND WHAT IS THE TECHNICAL NAME ? MY COMPRESSOR IS GA30 ATLAS COPCO TYPE.

Most air compressors will run fine using 30 weight non detergent oil.

You could drop the manufacturer a e-mail.

Your compressor shouldnt use a lot of oil ... maybe you are in need of some repair? New rings or bearings or seals?
0helpful
1answer

I have KYMCO S 200 and need to know what needs serviceing at 300 miles. What type of oil to use in engine and gearbox and what type filter if needed.

At 300 miles the only thing you might want to do is check the gearbox oil level and then lube and adjust the chain. Check with the dealer on the filter type. As to what type of oil, use 10w40 motor oil in the gear box. Don't use any synthetic oils, oil marked "EC", or oil with "special" additives. Stick with the major brands; Pennzoil, Quaker State, Mobil or Shell. If in a hot area like Texas or New Mexico go with 20w50.
fbae93f.gif
Please rate my answer. Thanks!

5helpful
1answer

When changing the oil, how many quarts and what type of oil is used?

Most engines have it stamped in block ,beside oil fill hole example 3600ml..read on oil bottle should say 936 ml on quart bottle.Most suzukis over 750cc use 3.9 quarts of oil. DO NOT USE SYNTHETIC OILS..will cause clutch slippage ..Also look under seat,most bikes have a sticker with oil capacity,filter type,spark plug type
Not finding what you are looking for?

632 views

Ask a Question

Usually answered in minutes!

Top Remington Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66957 Answers

Are you a Remington Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...