Question about Sennheiser Audio Players & Recorders

1 Answer

I am have trouble disconnecting my sennheiser ski 100 G3 from my microphone - what is the secret

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Sennheiser Master
  • 10,535 Answers

Hello Timothy, the microphone has a 3.5 mm connector, which has a thread, you must unscrew this thread and you should be able to exit
Discuss the type of connector you have
I hope you can solve the problem
Greetings Franco Dosil

Hola Timothy, el microfono tiene un conector de 3,5 mm, que tiene una rosca , debes desenroscar esta rosca y tendria que poder salir
Comenta el tipo de conector tiene
Espero puedas resolver el problema
Saludos Franco Dosil
https://assets.sennheiser.com/global-downloads/file/8949/SK_100_G3_Manual_12_2016_EN.pdf

Posted on Jun 21, 2019

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Fred Yearian

  • 5603 Answers

SOURCE: How do you troubleshoot phasing issues with the

Phasing issues? Not sure what you mean by phasing. Phasing would be the phase of the audio pressure on the mic versus the electrical phase out of the receiver. DO NOT EXPECT the phase to be stable in any way as there is a communication and data conversion in the loop. The phase will be highly audio frequency dependent as well.

Posted on May 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How often to change the timing belt


Since this is posted under a Sennheiser microphone, and I don't think they need timing belts. you might want to re-think your question.

Mar 21, 2015 | Sennheiser EW352 G3 Microphone

1 Answer

How do i sync my mic to my receiveri have a ew 100 g3 and after some kids were playing with it, I can't get any sound


Pressing the sync button whilst holding the mic close to the IR unit on the receiver should sync things back up. If this has already been done things to try next are as follows.

RF Mute. Press and release the power button. RF Mute should be displayed. Press the roccker switch and select RF mute OFF, press the rocker switch again.
Check in the advanced menu that the pilot tone is on on the handheld AND the receiver.

Jan 23, 2014 | Sennheiser Evolution G2 100 Series UHF...

1 Answer

Stuck arrow button


I have the same problem, there must be a factory defect with the design of the down arrow button.

Jan 04, 2013 | Sennheiser EK 100 G3 Microphone

1 Answer

Issue more complicated than originally thought!


This isn't a solution. But after I've gotten into my microphone with the same issue using a torx screwdriver I found that I (Electrical Engineer) don't have the proper equipment to fix the issue. Roughly 100 dollars (Flat rate) and a send off to Sennheiser is your best bet.

May 22, 2012 | Sennheiser 100/500 G2 Series Wireless...

1 Answer

How do you troubleshoot phasing issues with the Sennheiser 135 G3 wireless microphone?


Phasing issues? Not sure what you mean by phasing. Phasing would be the phase of the audio pressure on the mic versus the electrical phase out of the receiver. DO NOT EXPECT the phase to be stable in any way as there is a communication and data conversion in the loop. The phase will be highly audio frequency dependent as well.

May 14, 2011 | Sennheiser EW 135 G3 Microphone

1 Answer

WHAT PLACE repair ew 100 micro, d ON/OFF switch


Hi,

You're local Sennheiser dealer can fix it, no problem.
The repair takes a half an hour.

Regards,
Gerard

Mar 04, 2010 | Sennheiser Audio Players & Recorders

1 Answer

Ew100 receiver is getting siganl but no sound is coming through


Hi,

Maybe the gain in the receiver is down.
You can adjust the outputgain the menu.

Good luck,
Gerard

Nov 06, 2009 | Sennheiser 100/500 G2 Series Wireless...

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sennheiser Audio Players & Recorders Experts

Michial Gueffroy

Level 3 Expert

1140 Answers

Rob Beech

Level 2 Expert

63 Answers

Geoff

Level 3 Expert

562 Answers

Are you a Sennheiser Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...