Our t.v.'s color is off. There is no blue or yellows showing. I have tried to adjust the set according to the book. In the top left hand corner of set where it shows a blimp of red, green and blue, the red and green flash but the blue does not. (this is when I put the "menu" on) What can be done.
We bought the set on 2/08/05 and replaced lamp on 9/09/06
You both will need to have a service center come out to try to reset the TV using the reset jig. A JVC authorized service center will be the only ones that will have access to and training to use this jig. It is a good chance reseting it fix the color problem but it could also be something more serious.
DRIVE CONVERGENCE Adjustment (Using remote control)
•Use
the inner RGB box pattern.
(1)Set
the [SLEEP TIMER] key to 0 min.
(2)Press
the [DISPLAY] key and the [VIDEO STATUS]key simultaneously.
(3)Press
the [9] key to display the RGB box pattern.
(4)Select
the R mode by pressing the [DISPLAY] key.
(5)Adjust
the R mode to setting as same as G mode bypressing the [CH ]+ / [CH -] key.
(6)Select
the B mode pressing by the [DISPLAY] key.
(7)Adjust
the B mode to setting as same as G mode bypressing the [VOL] - / [VOL +] key.
(8)Check
to see that the cross pattern is white. If thecross pattern is not white,
readjust (5) to (6).
That's it, your color is now corrected. Yes, I know...your welcome.
460 views
Usually answered in minutes!
bulb was replaced, since the TV color is way off and seems to be getting worse. Any ideas?
when trying to ajust the color the red and the green colors in the top left hand coner blink
images on screen in HD and clear, but green. Cycle power on and off, and RGB colors visible but not registered. There are three slightly off images, one red, one green, and one blue. Sometimes, a few power on/off cycles will eventually fix. What could be wrong?
×