Clothes remain soaking wet after a full cycle, including the spin cycle at 1400 rpm. I know the programme completes but it appears that the water created from the spin cycle isn't draining from the drum or very little is and therefore this water just soaks back into the clothes.
I've checked all the hoses on both the machine and the under sink connection and can see no blockages but could this be a fault with the pump eg blocked filters or a small item of clothing has somehow lodged itself between the rubber seal around the drum and the drainage holes?
Thanks
Paul
Hi Paul, Assuming it is pumping out ok, Unplug the machine tip it back at an angle, underneath you will see a black hose that is attached to the bottom of the drum, remove this, take out the ball and discard it and remove anything that may be in the filter, replace the hose and try the machine.
673 views
Usually answered in minutes!
Hi Coxy
Your solution went a long way to helping me fix the problem, thanks!
The problem was actually a 1" (rusty) nail lodged within the the pump housing which, upon removal, has now remedied the problem.
Now checking all pockets before washing any item of clothing!!!
noisy spin wet clothes
any cycle i choose will not complete it wont spin or drain and drum is still full of water and red light keeps flashing
×