Question about Washing Machines
Good be washertime ate control board you may want call a techcian to help solve your problem
Posted on Jun 24, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Sounds like cold water solenoid is not opening all the way, its easy to replace, and is found inside the wash machine where the hose connects
Posted on Apr 25, 2009
If you lay the drain hose down into a bucket does water come out fairly quickly?
If so then it is not a blockage
You may have a coin or other small object in the pump which stops the impeller turning so no pumping action
Only solution is to check if the pump is free to turn either via the filter opening or taking the back panel off (Remove power before doing so ) and turning the pump by hand (there will be a fan blade on the end which is connected directly to the impeller.
If that will not turn very easily then you need to take off the hoses and check what is happening with the pump unit
Posted on May 23, 2009
Tips for a great answer:
Nov 10, 2016 | Washing Machines
Jul 31, 2015 | Kenmore Washing Machines
Jan 22, 2013 | Washing Machines
Nov 17, 2009 | Washing Machines
Apr 09, 2009 | Kenmore 24052 Top Load Washer
Apr 01, 2007 | Asko W6221 Front Load Washer
35 people viewed this question
Usually answered in minutes!