I am unfamiliar with your machine. It is usual the tub drain is at the lowest part of the tub and the pump is below. This means if there are no blockages, a weight of water is always present at the pump impeller so a simple pump can be used and no priming is necessary
Generally the arrangement of hoses, the drain and pump is so simple if there are no blockages and the pump is in good order and running, pumping is inevitable.
A blockage of the drain or of the outlet hose isn't unusual...
SOURCE: our maytag neptune mah8700aww front loader will
The drain pump os obviously either blocked or gone. Lie the drain hose on the ground to drain by gravity. Then have a look at the pump. This may need to be taken out as I'm not sure if there is a pump filter on this particular model. The door is designed to not open with water in the drum.
SOURCE: my maytag neptune mah8700aww is showing a nd code
I would first check the drain stand pipe to see if it is clogged in any way. You can watch it during a drain cycle, assuming your washer is draining, and see if it backs up in there. The next area I would check is the drain hose itself. Make sure it is not kinked, or blocked either. You can check for blocks by pulling the hose off and running a semi rigid object through it. A close hanger, straightened out will work most of the time. If all is clear, and you are not getting any other codes on your display, then the pump is the next thing to check.
SOURCE: I have a Maytag Neptune
See this link for the Service Manual and a pic of Drain Pump/Drain Line on the right side of the machine. leaking at bottom of washer after it spins out not alot of water but a pain in the ****, how do you
You can place the machine in Service Mode once you have the Service Manual and turn on the drain pump thru console commands.
As I mention in the other post here on FIXYA you can only access the drain pump with the front cover removed.
If you place the machine in a Spin Only cycle will it complete the cycle?
If you can give a bit more detail on your troubleshooting maybe I can help.
SOURCE: What's your problem?my maytag neptune washer is not draining
You might have a bad timer or drain pump.
263 views
Usually answered in minutes!
×