Sansui dvd player with no remote

Cleaning DVDs that look like a DVD with a small brush on them will rarely work. After unplugging unit try opening unit and using a Qtip and rubbing alcohol try VERY GENTLY cleaning the optic on the player. If this does not work player will need to be replaced.

Remotes.com has a substitute remote that does the functions of the original here: http://www.remotes.com/store/sansui/vrdvd4005.html.

I hope this helps.

Cindy Wells

Check out my tip on how to best control the internal USB hub on your PC

http://www.fixya.com/support/r3841405-sandisk_u3_launcher_wont_start_conflict

Open your unit and clean the lens of your dvd using cotton bud. If that did no work, try to adjust the trimmer located at the pcb of the lens.. There are 2 trimmers whose function is to focus the alignment of the lens. Adjust the right trimmer minimal only using a mini plastic screw clockwise or counterclockwise direction. Be very careful when adjusting the trimmer. Too much adjustment may cause your dvd to not recognize all the discs that you will insert.

here is the link to you receivers manuals:
http://www.pioneer.co.uk/uk/support/manuals/DVH-P5000MP/index.html
press source to select between sources:
dab turner-tv-dvd-sdvd-multicd-ext1-ext2-aux
this function is only avail on the remote. Source is upper right button above the round up/down/left/right toggle.

Cheers!

There is a factory preset parental code you need to enter (unless that default code was changed). That factory code is in your user manual. In order the enter the codem, you will need the remote (number pad). The remote can be ordered through Soundstorm for $35.00 and you can download the manual from their knowledge base, just search "SDVD-100". Once you have both, just use the number pad on the remote to enter the factory parental code and the system will unlock.

Sansui VRDVD4005 will record DVDs provided they are DVD-R NOT DVD+R. I have one of these for 3 going on 4 years and I took it apart and cleaned the dust off the magnetic hub and that worked for awhile but (2-3 months) now I'm having trouble finalizing again. Someone on this site said it needs 8x NOT 16x disks ... 'cause it's an older unit ... I'm checking it out in the users manuel.
magicbbs

Universal remotes rarely fully work with these type of units. Call Orion customer service 800 289 0980 to price an original remote.

try giving the reset ...........

i have a sdvd-900 and a sdvd-300m
and i donot have the remote control how do i get it