57.x FAN FAILURE CALL SERVICE
Control Panel Message
57.x FAN FAILURE CALL SERVICE
Event Log Error
Service Messages:
57.01.00
57.02.00
57.03.00
57.04.00
Required Action
- A
fan motor failure occurred. All fans are enabled to low speed operation
at printer power-on. Fans will go into high-speed operation during the
print cycle. All fans are disabled during PowerSave Mode.
- x = 1: FM1 (Laser/Scanner Fan)
- x = 2: FM2 (Power Supply Cooling Fan)
- x = 3: FM3 (Formatter Fan)
- x = 4: FM4 (Face Down Deliver Fan)
- Cycle power. It the message continues, check and reseat cabling between the fan motor(s) and the DC Controller PCA.
- Fan 1 J208
- Fan 2 J216
- Fan 3 J210
- Fan 4 J225
- Replace the faulty fan motor.
×