BEKO WMA641W washing machine not draining but pump working.

Question 1

0helpful

2answers

Code EA on my beko washing machine? how to fix it

Beko washing machine error code e5
Error E5. This can mean a number of things but usually involves the machine not draining properly and taking too long to go through its cycle or not spinning. There could be blockages or problems with the pump/filter or an issue with the control board.
https://www.washingmachinerepairservices.co.uk/beko-washing-machine-error-codes/

Mar 10, 2018 • Beko Washing Machines

0helpful

1answer

My Beko WMP601W wont drain, clothes come out soaking wet, also the draw keeps oozing with suds, all over the floor???

You need to check the drain pump is free of any obstructions, can you hear the drain pump operating?
The machine will need several short wash cycles to flush out the excess soap which is causing the suds.

Mar 26, 2017 • Beko Washing Machines

0helpful

2answers

Beko wma641w wont spin?

Hi if your beko wma641w washing machine wont drain or has a spin problem then you have to check the carbon brushes first.

Also check all waste pipes are clear and inspect the pump I have included this video below.

At our website I am doing self diagnostic videos on these beko's as we speak so all tutorials will be in this link below
How to replace Beko Washing Machine Motor Carbon Brushes
you might find this test video helpful but only do it if you have checked the motor

Jan 24, 2013 • Washing Machines

0helpful

2answers

Water wont empty from my machine

Hi if your beko WME7247W washing machine wont drain or has a spin problem then you have to check the carbon brushes first.

Also check all waste pipes are clear and inspect the pump I have included this video below.

At our website I am doing self diagnostic videos on these beko's as we speak so all tutorials will be in this link below
How to replace Beko Washing Machine Motor Carbon Brushes
you might find this test video helpful but only do it if you have checked the motor

Nov 04, 2012 • Beko WME7247W Washing Machine

0helpful

2answers

My beko 1613 washing machine wont drain, and how do i operate the dial

Hi if your beko 1613 washing machine wont drain or has a spin problem then you have to check the carbon brushes first.
Also check all waste pipes are clear and inspect the pump I have included this video below. At our website I am doing self diagnostic videos on these beko's as we speak so all tutorials will be in this link below
How to replace Beko Washing Machine Motor Carbon Brushes

Mar 10, 2012 • Beko Washing Machines

0helpful

2answers

Wont do final spin

Hi if your Beko WME7247W washing machine wont drain or has a spin problem then you have to check the carbon brushes first.

Also check all waste pipes are clear and inspect the pump I have included this video below.

At our website I am doing self diagnostic videos on these beko's as we speak so all tutorials will be in this link below
How to replace Beko Washing Machine Motor Carbon Brushes
you might find this test video helpful but only do it if you have checked the motor more beko test videos at site

Dec 02, 2011 • Beko WME7247W Washing Machine

0helpful

1answer

Just change brushers on beko wma641w and now water wont go in washer

make sure you have a circut through the brushes

Jul 30, 2009 • Washing Machines

1helpful

2answers

Child lock and spin/end lights on and stuck need to reset

Hard Reset - In some cases the control can be non-functioning or may not accept activation from the control panel. To clear and restart the control follow the these steps:

* Unplug or turn the circuit breaker off for 30 seconds.
* Reconnect the unit to the power source by turning the breaker back on or plugging the unit back into the wall outlet.
* Press the Pause/Cancel/Stop button twice to clear the "PF" in the display.
* Start a short cycle to check the operation of the machine by selecting a cycle and pressing and holding the start button until the machine starts.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Apr 12, 2009 • Washing Machines

22helpful

2answers

Beko wma641w reset

hi
to reset these al you do is press and hold the start button for about 5 seconds then it should reset if not then you have a faulty pcb

regards

Mar 22, 2009 • Washing Machines

1helpful

1answer

Have a beko washing machine and the water will not drain! Any ideas PLEASE

hi there......the water is not draining because..(a) blocked filter or drain pump....(b)...failed drain pump...(c)...bocked outlet to sink...or blocked drain hose from machine

regards Sir Galahad

Jan 29, 2009 • Beko 24 in. D3421F Free-standing...

Question 2

tomvogel492

Contributor 36 Answers
Posted on Aug 21, 2009

tomvogel492

Contributor

Joined: Aug 21, 2009

Answers

36

Questions

0

Helped

6601

Points

47

Are you sure the pump is working, or it the motor thats running? If the pump is truly working, there is a clog in pump or line. If the motor is working, but the pump is not, you will need to replace. You can usually buy a replacement pump for the washing machine for around $50. They are usually easy to install for a beginner DYI. Make sure you know the easiest way to remove washing machine housing to get at pump and motor. Unplug entire unit. Remove 2 hoses for pump and either screws or brackets to remove housing. BTW if the washing machine won't drain, you are going to have a bunch of water that gravity wants to dump out of machine. Bring pump to parts dealer for exact match.

Related Topics:

BEKO WMA641W washing machine not draining but pump working.

1 Answer

tomvogel492

Add Your Answer

Attachments: Added items

Related Questions:

Code EA on my beko washing machine? how to fix it