Westinghouse tv model number vr-4085DF why yellow light when shut off

Unlikely that old. Ask direct.

How to Update a Westinghouse LCD TV ' Techwalla

www.techwalla.com > ... > Entertainment

In order to stay up-to-date, most high-end televisions periodically release firmware updates (this includes Westinghouse LCD televisions). These updates ...

VR4085DF Firmware Update - Westinghouse - HelpOwl.com

www.helpowl.com > VR4085DF > Research > search=v...

Our system has returned the following pages from the Westinghouse VR4085DF data we have on file. Please use the box above to search for any other ...

Support - Westinghouse Electronics

westinghouseelectronics.com > support

Support. Need to communicate with a customer service representative? Click the link above to contact Customer Service. Please fill out the request for service or ...

Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
Some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Does the tv have soft touch buttons...If they do...They contain a gell which can harden over time and interfere with normal operation...either replace or disconnect soft touch control on TV and work with remote only...

If you took a high voltage hit then chances are pretty good that you fried the whole unit. The best I can offer is taking off the back and see if you can find any burn marks on any of the boards.

Hi,

You can download and print the instruction manual in PDF format by clicking this link.

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Thanks for using FixYa.

Try these codes:070,085,001,126,166,079,120 I hope that helps.

Hello Rickd971, there is a FW update that will allow you to program your remote to the TV. Please send me a quick email to [email protected] with the serial # TW# and a contact # in the event I need any other information and I will forward you the FW along with installation instructions.

Have you tried: 020, 458, 463,
White Westinghouse:211, 408, 449

10885...10889....10890...11282...11577....they work however with my tv only changes the channel when i turn it off...comcast said to go get new remote.

Hello mwhinz, there are currently no codes set up for your TV, what you will need to do is call 1-800-701-0680 or send me a quick email to [email protected] to get the FW via email that will allow you to program your remote using different codes other than Westinghouse codes. Please make sure you include the model #, serial #, and TW # all located on the back of the TV. Please rate my answer if it was helpful.