Question about Watches

10 Answers

Acqua Indiglo Digital Watch

I can't seem to reset the time on this watch. I can reset the alarm, but not the time. Thank you

Posted by on

  • 29 more comments 
  • artsy55 Dec 07, 2007

    You got it! I had to tweek your instructions a bit, but it worked. Thanks very much.

  • Anonymous Jan 07, 2008

    I cannot reset the time on Acqua indiglo wrist watch! I have tried every possible combination of buttons, but to no avail. The stop watch works fine and I can switch time zones but not change the time in either setting.

  • SAPSJ Jan 07, 2008

    Cannot set time on Acqua digital indiglo wrist watch. Tried every possible combination of buttons to no avail. Help!

  • bungacat Jan 08, 2008

    Am not having any success with setting this watch. The posted solution is not working -- perhaps i am not understanding the instructions.

  • Anonymous Mar 02, 2008

    i can't change the time or the time zone

  • Anonymous Apr 01, 2008

    i have lost my manual

  • Anonymous May 02, 2008

    I can't set the time

  • Anonymous May 23, 2008

    setting the time on aqua indiglo

  • Anonymous Jul 26, 2008

    cannot set the clock setting

  • Anonymous Jul 26, 2008

    lost instructions - cannot set clock setting

  • rcnyccc Jul 26, 2008

    cannot set the time and day settings

  • normanrw Jul 28, 2008

    Acqua analog watch A2A381 1 stem.
    I can't set my watch to to correct day of the week and the correct month
    When I get it set it is not correct the next day


  • pjpete Jul 28, 2008

    I have a Timex Acqua Indiglo watch. It is on 24 hour time. How do I switch it to 12 hour mode.



    Thank you



  • Anonymous Aug 01, 2008

    Timex Acqua watch setting procedure



  • Anonymous Aug 13, 2008

    i dont no how to change the time and i lost my instuction book

  • Anonymous Aug 16, 2008

    cant set time

  • parker689 Aug 17, 2008

    I have an "ACQUA INDIGLO DIGITAL" WATCH with a Velcro Strap. I am not even sure who the MANUFACTURER is. I never got the Instructions from Walgreens when I bought this watch "a couple of years ago."

    Of course, Walgreens no longer sells this product, so I could get zero details about the missing Instructions.

    The date is wrong, the time is wrong. About the only thing I can do is Set the Alarm. MY WATCH...has one button on each side,(approximates "ten and two), and it has Two Big Silver Buttons on the bottom of the 'watch face". The details in the back of the watch / caseback are, as best as I could read it, are: ACQUA. CR2016 CELL, WR 30 M, STAINLESS STEEL BACK, N7, and a sticker that says "China".

    Would someone be so kind to help me fix my problems or tell me how to obtain a Copy of the Instructios? Thank you, kindly, Jim in Phoenix, AZ, by way of Long Island, NY. Thanks!!!

  • tbeebe6535 Aug 31, 2008

    SETTING THE TIME OF DAY

  • cjflyntz Sep 02, 2008

    I have the same problem. I can set the time by pulling the stem out. Supposedly, there is a middle stop on the stem that will set the date, but I cannot get it to work.

  • Anonymous Sep 05, 2008

    Lost instructions for for Timex 1440 sports and need to reset the time

  • Anonymous Sep 17, 2008

    I have an Acqua Indiglo watch -model WR30M. Any know who to reset the time on this thing????



    Thanks

    Paula

  • rubikcubeman Nov 18, 2008

    I have a similar problem with the Acqua. I can change the time, but do not know how to set it once I have the time correct. Like one of the other users, I have two large buttons (sp/reset and st/stop on the face of the watch) and a mode and indiglo button on the sides.



    any help would be appreciated.



    thank you,

    stewart

  • Anonymous Nov 25, 2008

    I can set the alarm time but i cant reset the actual time. how do i do it?

  • Anonymous Nov 26, 2008

    I can't change the time!!!! (Acqua Indigo) Help...

  • Anonymous Dec 14, 2008

    My Acqua Indiglo only has one button (not a digital) and like the others, I can't figure how to change the date. The stem only seems to work on the clock hands.

  • Anonymous Dec 25, 2008

    I have the same problem

    i cant seem to set it

  • mitesh31277 Dec 28, 2008

    i cannot reset time in acqua indiglo watch

  • askewj174 Mar 08, 2009

    can'tset the time

  • Anonymous Mar 11, 2009

    how do you reset the time

  • Anonymous Mar 30, 2014

    RESET NEW TIME

  • Anonymous Apr 01, 2014

    Reset digital watch time

×

Ad

10 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My watch has 4 buttons (2 on the left, 2 on the right) plus the "Indiglo" button. Use the "Mode" button (lower left) to move between the time and the stopwatch. When seeing the stopwatch, hold the "Mode" button. This will get you to the alarm setting mode. Press the "Mode" button again to switch to the time setting mode. Use the "Start/Stop" button (upper right) to move from seconds > minutes > hour > date > day of week. Use the "Spl/Reset" button (lower right) to change the numbers.

-AP

Posted on Feb 14, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

[Improve] Acqua Indiglo Digital Watch - abar_a.gif?v=54668 This worked for me:

Press and hold the MODE button (bottom left) for approximately 3 seconds.

When the Alarm set time starts flashing, press the MODE button once more. Now the seconds for the watch time should be flashing.

Use the START/STOP button (top right) to move bewteen items and the SPL/RESET button (bottom right) to change the item.

Moving between all items, it will take you through: seconds, minutes, hours, month, date, day of the week. Simply press MODE when your settings are complete.

Zenra

Posted on Oct 10, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Basic time setting is:
Press 3, three times to get to time setting mode, then press 1 to set the numbers.. press 2 to go the next set of numbers.
If the hours are 24 hr mode, cycle 12 hours to get to 12 hr mode.
Note: Numbered clockwise from top right being #1

Posted on Dec 04, 2007

  • Anonymous Dec 04, 2007

    * should read: 'cycle 24 hrs to get to 12 hr mode - or vice versa..'

×

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Press and hold the MODE button (bottom left) for approximately 3 seconds.

When the Alarm set time starts flashing, press the MODE button once more. Now the seconds for the watch time should be flashing.

Use the START/STOP button (top right) to move bewteen items and the SPL/RESET button (bottom right) to change the item.

Moving between all items, it will take you through: seconds, minutes, hours, month, date, day of the week. Simply press MODE when your settings are complete.

Remember to make sure that you hold down the MODE button for a sufficient length of time

Posted on Sep 25, 2010

IndigloWatch Watch

Press and hold button 2 when the clock shows; this gets change going. First comes the alarm. Press 2 again to get to the clock. Seconds show first. Press 3 to get to the minutes. Press 3 again to get the hour.

1     3


2     4


Press 4 then  2 and the clock goes to regular time on the face, 
not 1400.

Press 4 and then 3 to turn on the alarm or turn it off

Press 2 to switch between time and stop watch

Press 3 to run stop watch, then 3 to stop it and 4 to reset it

Press 1 only for lighting the dial
Press 3 for the date

When the time is showing, press 3 and then 4 to swith the day and date

Posted on Apr 24, 2008

  • Tobi Danford
    Tobi Danford Dec 22, 2014

    Of all the instructions I read, this was the most simple, and most helpful. Everything was covered, how to set the time, how to turn off the alarm, how to switch between 12h and 24h modes. Thanks!!!

×

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Can you keep this watch in the 12 hr mode.

Posted on Mar 13, 2010

Excellent site! I have not been able to stop the alarm going off at 11 something at night since I bought this thing at Walgreens (without instructions.) I have had it put away in the closet - and could still hear the tiny beep most nights.

I followed the direction of instructions above and FINALLY the little "sound" icon disappeared from the screenI

I did this by pressing and HOLDING in button #4 - then pressing button #3.

Thank you for heading me in the right direction - and good luck to the next person with this problem!!


Posted on Nov 05, 2008

I can't seem to adjust the date on my Acqua watch. I can set the time by turning the stem but nothing seems to work to get the date to change. Any suggestions?

Posted on Mar 14, 2008

Wow more then a yeat later and i still found it helpful!

Posted on Mar 01, 2008

THANKS!!

Posted on Dec 17, 2007

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you stop the hourly beep on my watch and turn off the alarm?


press in all buttons at once hold them.should beep once or 5 times. resets everything. then re set time.www.watchrepairbattery.com

Mar 22, 2012 | Invicta Ll Collection Multi Function Black...

1 Answer

I have an aquatech watch and don't know how to set it.


Thank you for contactng FixYa.
Setting the Time and Date
  • To set the time and date on your Aquatech watch, begin by pressing the "Mode" button three times to access the time setting screen. Use the "Lap/Reset" button to set the hour on your watch. Use the "Start/Stop" button to advance the numbers to reach the correct hour. When you've set the hour, use the "Lap/Reset" button to set the minutes, using the "Start/Stop" button to advance to the correct minute. Repeat the procedure to set the seconds, month, date and day of the week on your Aquatech watch.
  • Setting an Alarm
  • To set an alarm on your Aquatech watch, begin by pressing the "Mode" button two times to access the alarm setting screen. Use the "Lap/Reset" button to set the hours place, using the "Start/Stop" button to reach the correct hour. Repeat the same procedure to set the minutes for your alarm. When you have finished setting the alarm, activate it by simultaneously holding the "Lap/Reset" and "Start/Stop" buttons until the alarm icon appears. When the alarm sounds, silence it by pressing the "Lap/Reset" button.
  • Deactivating the Hourly Chime
  • Many Aquatech watch models feature an automatic hourly chime. This can be inappropriate and inconvenient in many situations. To deactivate the hourly chime on an Aquatech watch, simply press and hold the "Lap/Reset" and "Mode" buttons simultaneously. After you have correctly deactivated the hourly chime, the hourly chime indicator icon will disappear from the watch's main screen.

  • Best regards. Jewel

    Sep 18, 2010 | Watches

    1 Answer

    I cant get the time set correctly! When i follow instructions it just seems to set the alarm! How do i do it?


    Hi jeffrey_lafi,

    You can easily change the time and date of your Armitron watch by following the steps below.

    1. Press the MODE button once. This will put you in the timer.

    2. Press and hold down the MODE button. This will put you in the alarm set display.

    3. Press the MODE button once more and it will put you in the time set display.

    4. Use the ST/SP button to change the blinking portion of the time. Then use RESET button to move you thru the different parts of the time/date.

    Hope it helps.

    Thank you for using FixYa.

    Jul 08, 2010 | Armitron 40/8125BLK Digital Sport Watch

    3 Answers

    Seiko 7t62 Coutura Black Ion; alarm resets NOT to current time but to about 3 hours later?! Yes, I have RTFM ;-)


    Click on my profile, then click on TIPS AND TRICKS. There you will find link for all Seiko watch manuals. Download yours and learn how to reset the alarm. Rate me, plz.

    Feb 20, 2010 | Seiko Coutura Chronograph Watch

    3 Answers

    Xinjia xj-686 watch can't turn alarm off


    I have the same problem with the xinjia-686. These instructions posted for another digital sports watch worked for me.

    noavatar_s.gif davidtolond
    Rank: Guru citizen.gif jewelry_watches_small.png Expert
    Rating: 85%, 400 votes
    I have the AW21312W, which has 4 buttons:


    1. Light (Top left)
    2. Mode (Bottom Left)
    3. Start/Stop (Top Right)
    4. Lap/Reset (Bottom right)
    To turn the set alarm off, push buttons 3 and 4 at the same time, the alarm icon should appear or disappear

    To turn off the hourly chime, press button 4. While holding it down, press button 2 and the days of the week disappear. The chime is now off. If you want the chime, press button 4 and hold while you press button 2. When all the days show, the chime is on.

    Feb 19, 2010 | Watches

    3 Answers

    Can't figure out how to deactivate the alarm on Umbro U564B watch


    Start with watch in normal clock mode. press and hold bottom right "lap reset" - alarm time appears. Keeping "lap reset" held, I can then toggle the alarm on and off using top right "start/stop".
    Qiu: Circle segment lights up (only a black point in the middle, NO ALARM)
    Circle segment with a black section on the above middle point, ALARM ON.

    Mar 03, 2009 | Bulova Watch

    1 Answer

    How do i set alarm on a gap sport watch?


    For setting Time & Date...
    1. Push "MODE" button three times (change Mode to TimeSet)
    Time -> StopWatch -> AlarmTimeSet -> TimeSet -> Time ->...
    2. Flashing Second Number Digits
    3. Push "RESET" to select...
    Second -> Minute -> Hour(12hr<->24hr) ->...
    Date -> Month -> Day of Week -> Second -> ....(repeat)
    4. Use "START" to set each item...

    For setting Alarm ON/OFF
    1. Push "RESET" button then Push "START" same time...
    Alarm ON -> Alarm OFF -> ... (repeat)

    Jan 09, 2009 | Columbia All Sport Digi Watch l

    1 Answer

    I just bought a Mondaine travel alarm pocket watch. Instructions say the crown has 3 positions. 1> Home normal for a quartz watch. 2> Pull out 1/2 way to set alarm. 3> Pull out all way to set time. My...


    It seems like your watch has a little short stem and that's why it has only 2 positions. This does not affect battery in any way, nor the timekeeping.
    The only downside of this is that you can accidentaly reset alarm time without knowing it as your watch crown is in permanent 1/2 way position.
    If you are happy with that - keep your watch.

    Dec 12, 2008 | Watches

    1 Answer

    Arnette Digital Watch


    So My arnette digital wrist watch was going off every 5 minutes. I hit the Mode, Reset, and St/STP buttons at the same time out of frustration, and it seemed to turn my alarm off.

    Mar 31, 2008 | Watches

    Not finding what you are looking for?
    Watches Logo

    Related Topics:

    23,036 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Watches Experts

    Janelle Schoonover
    Janelle Schoonover

    Level 3 Expert

    842 Answers

    Marvin
    Marvin

    Level 3 Expert

    85222 Answers

    The Knight
    The Knight

    Level 3 Expert

    76204 Answers

    Are you a Watch Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...