Posted on Dec 04, 2007

HDMI input not working

Hello,
Just tried to connect my new XBox Elite to a new 50" Zenith Plasma using HDMI supplied cables from XBox to HDMI input on Plasma. Input source is set to "HDMI" but does not receve signal from XBox. The Component cables do work, however.
Thanks for any suggestions.

7 more comments
razgrez Nov 29, 2008

i have a vizio and mine is doing the same thing it just up and died
Anonymous Mar 15, 2014

Using a hdmi cable had been working Using a hdmi cable had been working
Anonymous Mar 19, 2014

Pairing tablet through HDMI cable Pairing tablet through HDMI cable
Anonymous Mar 23, 2014

no signal on screen tried all inputs have cable
Anonymous Mar 23, 2014

Using HDMI cables I have my computer and Prism connected to my samsung 2333HD monitor. all I get is an X. So I connected my computer another way and it works. I don't get it.
Anonymous Mar 27, 2014

Have just acquired small beko flatscreen everything working perfect but picture lime green it's attached by scary lead to sky box and when I switch to sky menu col our is perfect also perfect colour on Xbox in hdmi input
Anonymous Mar 27, 2014

Have just acquired small beko flatscreen everything working perfect but picture lime green it's attached by scary lead to sky box and when I switch to sky menu col our is perfect also perfect colour on Xbox in hdmi input
Anonymous Mar 30, 2014

There is no response when I plug in the HDMI cable. I've used HDMI cables that I connected to my other TVs and worked just fine.
Anonymous Mar 30, 2014

no signal from cable no signal from cable

1 Answer

Anonymous

I had the same problem with my 50 zenith when it was new. It needs a HDMI board replaced.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

I have no sound from Xbox HDMI connection.

you likely connected it with one or both units involved on and HDMI does not like that--prone to all sorts of audio issues.

If in doubt unplug the units and wait and plug back up making the connections first.

Read full answer

Jun 07, 2012 • Zenith " 50"" Class - Plasma - 720p -...

0helpful

1answer

I have a zenith tv older model, and have dish network, i need to know how to hook it up and switch it over so i can play it

If you have an HD receiver you will want to use one of two types of cables; you can use component cables which have five ends red, blue, green, red and white, or you can use an HDMI cable which will have one flat connection. If you have a standard definition receiver you will want to use RCA cables these have three ends red yellow white. The connections will be labeled on the television as well as the receiver. Once you get this connected hit the input/source button on your TV set if you're using RCA cables you want the TV set to video 1 or video 2. If you're using an HDMI cable then set the TV to HDMI 1or 2 using the input /source button. If you use Component cables set the TV to Y/PB/PR or component 1/2.

Daniel Busa
DISH Network Customer Service

Read full answer

Mar 09, 2011 • Zenith Z50P3 50 in. Plasma TV

2helpful

1answer

How do i hook up my ps3 to my tv

Buy a cable call an HDMI cable.Just connect one side of the HDMI cable to the PS3 HDMI port and the other side of the HDMI cable to the tv HDMI port.Than use the remote,push the button said INPUT goes into modes 1,2,3... so on to find out which one the PS3 game system is on.

Read full answer

Nov 20, 2010 • Zenith Z50P3 50 in. Plasma TV

5helpful

2answers

My HDMI Terminals for Pro-Ro6u Media Receiver is not working. Do you think it is the terminal or the HDMI Cable.

This could be an HDCP "hand shake" problem. Try turning both the TV and the connecting device off, connect the two using HDMI, turn both of them back on, select the proper input and see if you get a picture. If nothing happens try the other HDMI inputs by following the steps listed above. I hope this helps.

See the following Thread for more information about problems with the Pro-Ro6u.

http://www.tv-forums.com/forum/TV_Equipment_C4/TV_Repair_Forum_F3/Pioneer_Pro_RO6U_Media_Receiver_P46635/

Read full answer

Feb 08, 2010 • Pioneer Elite PRO-1140HD 50 in. Plasma...

0helpful

1answer

No Xbox image via HDMI

the only thing i can think of is that you havent flicked the switch on the hdmi cables wher the plug into the xbox from tv to hdmi, if you have the go ahead and get it replaced

Read full answer

Jan 04, 2010 • Microsoft Xbox 360 Elite Console - Black

0helpful

1answer

I just bought a pioneer elite pro-111fd and i can't get my cable or my ps3 to display. they are both connected through hdmi inputs

Make sure your on the correct input that the Cable and PS# are connected to i.e. Input 3, Input 4 etc.

Read full answer

Mar 14, 2009 • Pioneer Elite PRO-111FD 50 in. Plasma TV

0helpful

2answers

Looking to connect HDMI cable from dellW5001c to xbox360

192.168.15.1

i am appling this password. then username and password appling . plz help me
what is password and username.

Read full answer

Dec 27, 2008 • Dell W5001C 50 in. Plasma HDTV

0helpful

1answer

My hdmi output on my console does not seem to work. I've checked the cables and they're fine.

did you try to connect another type of cable?

try to connect a composite cable to start the normal video mode....

have you set your Hdmi TV input?
some people have dificult to configure them..

or could be cold solder in your xbox hdmi connector...try to resolder it...
or try another hdmi cable...
Good Luck!

Read full answer

Dec 05, 2008 • Microsoft Xbox 360 Elite Console

0helpful

1answer

HDMI XBOX360 Elite -"No Signal"

The connection order can be a key issue as to whether or not the HDMI signals will pass through the system. For best results the receiver should be turned on first, then the source device(s) and then the display. The reason for this has to do with getting the equipment to handshake properly for the HDCP protocol.

If HDMI video will not pass through your receiver, you may with to just connect the xbox using the component cables. Since component will pass through 720p and your TV is 1080i you should expect the same qualtiy and a more crisp picture.

Read full answer

Oct 12, 2008 • Denon AVR-2307Ci Receiver

0helpful

2answers

HD Cable Box; HD Plasma...........no picture or sound

Same problem, 42" lg plasma

Read full answer

Aug 14, 2007 • Pioneer PDP-5070HD 50 in. Plasma...

Not finding what you are looking for?

View Most Popular

Z50PX2D 50 in. Plasma HDTV

Televison & Video

I have no sound from Xbox HDMI connection.

Zenith " 50"" Class - Plasma - 720p - 600Hz - HDTV Z50PT320"

1,737 views

Ask a Question

Usually answered in minutes!

Check Out the Latest HD Televisions Report

View all Fixya Reports

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Zenith Z50PX2D 50 in. Plasma HDTV? Or just drag it here!

Related Topics:

HDMI input not working