I have a Globenfeld V12 and need instructions for setting and operation etc. I have found some on line but it doesnt seem to work

Search Results

images for vacuum lines for 1990 new v12

Hello

OK, you will be able to download the manual at the link below.

Click HERE.

Let me know if you found this helpful.

Kind regards
Andrea

http://topeak.com/products/Computers/PanoramV12WideScreenWireless

Downloads in various languages on right.

I had same problem . There is a vacuum resovoir tank located behind the left front splash shield . The vacuum line behind the battery goes to it . I removed two 5/32 screws just in front of the tire that hold the splash shield to the fender , carefully flex the shield away from the fender and take a look . I found the vacuum line had come loose , plugged it back on and everything works . Hope this helps

Google works wonders.
Type in the model number; I have found manuals from 1970's for my old SLR cameras.

click on "settings"
click on "General"
click on "Bluetooth"
If Off, click it ON
It should start searching for devices to pair with (make sure your other device is on and "discoverable")
If the iphone locates the headset it should prompt for the code.

you use the ps button on the remote (if you have the correct remote for your ps3) the ps button is clearly marked and is found just above the SELECT and START buttons

Atagert,

This might be too late but see attached instructions for SHP2061 watch. I had the same problem, but fortunately I found the instructions. Email me at [email protected] if you have trouble reading this attachment.

http://www.rangerusa.com/downloads.html