Detergent packs will not dissolve

google Maytag Quiet series 300 Handle and latch
there are several new handles about $30-35.
link to how to replace handle
copy and paste
https://www.youtube.com/watch?v=Tfw0F5XeWHY


..

You will need to clean the "internal duct work" for any blockage.

1. Be sure that you don't have something large blocking the dispenser door like a cutting board.
2. Make sure the water temp is 125 degrees going into the dishwasher. Cold water won't break down detergent correctly.
3. Make sure your getting water pressure: Run your dishwasher on normal. Wait until the cycle starts and the spray arms are spraying. Turn a cup right side up to catch water on the top rack if you run the dishwasher and wait 20 sec that cup should be half or full. If you don't have water in the cup you could have poor water pressure from your pump. This could indicate 1. Worn motor 2. Clogged pump

Have a great day!

replace the door latch and the handle check to see if the console loops that hold the latch are broken if so replace the console

We have a Maytag Bravo Quiet Series 300 washing machine, the door latch is broken. I have the replacement part ( the locking mechanism) but I need can not figure out how to get the top of the washer to flip up to give me access to top front of the machine to remove the old part and replace it with the new.

How do I flip back the top (not the door) of this machine?

John

Hold down the heated-dry button for 3 seconds and the light will clear.

i lost the manual , what does "5d" mean when it is

MY DISHWASHER KEEPS RUNNING, IT IS A WHIRLPOOL GOLD QUIET PARTNER IV

Maytag Quiet Series 300. The lights flash in sequence starting from the outside traveling inward. The timer counts backwards from 50 to 1. Then the sequence starts over. and continues over and over. I'm able to clear it when the time reaches 1 or 2. It stays off for a while (3-4 hours) then starts over. I can not clear the countdown until it reaches 1 or 2. After I clear it the dishwasher will work, but until then, no way. This happens with the door open or closed.

either there is not enough water (check water valve) or the pump filters are clogged (check and clean as necessary)