SIM2 Domino D10 Home Theater Projector Projector Logo

Related Topics:

Posted on Aug 28, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Projector is brand new out of the box. Powers up displays Sim2 logo then lamp goes out power light starts to flash and turns off about 3 minutes later. Same thing every time it's turned on. Anyone had the same problem with a simple solution?

Answer This Question
  • whitesw Aug 28, 2009

    Thanks for the info.Tried it again looking for the blinks. When the lamp first goes out i get 2 sequences of 1 long blink and 1 short blink being enviroment overtemperature however the room is at 22C.
    After this it is all short blinks until the power button turns red. Any thoughts?

×

1 Answer

jasbo

jasbo

Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

  • Master 2,239 Answers
  • Posted on Aug 28, 2009
jasbo
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

Joined: May 14, 2009
Answers
2239
Questions
1
Helped
991417
Points
5072

The number of blinks determine the problem:

Environment Over Temperature- 1 long blink / 1 short blink
DMD Over Temperature- 1 long blink / 2 short blinks
Lamp Over Temperature- 1 long blink / 3 short blinks
Fan1 Locked- 1 long blink / 4 short blinks
Fan2 Locked- 2 long blinks / 2 short blinks
Fan3 Locked- 2 long blinks / 3 short blinks
Fan4 Locked- 2 long blinks / 4 short blinks
DMD Initial Fail- 3 long blinks / 1 short blink
Lamp Initial Fail- 3 long blinks / 2 short blinks
Ballast UART Error- 3 long blinks / 3 short blinks
Temperature Sensor Fail- 3 long blinks / 4 short blinks
Inter Lock Open- 4 long blinks / 1 short blink

any of these will result in lamp off and shutdown.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Benq w1000 project not turning on
Look at the manual page 34, for the indicator messages. I suspect it's the same problem I have (which I haven't had formally diagnosed yet!), which I believe is a defective fan. My projector had been making a really loud noise on startup, which varied in length and volume. Recently the projector has taken to turning itself off after being on for about a minute, and the power light flashes green, with the temp and lamp lights flashing red.
Read full answer
Jan 27, 2012 • BenQ W10000 Projector
0helpful
2answers

Dell 2300mp

Replacing the lamp module requires special considerations:
  1. Turn off the projector.
  2. Wait 30 minutes for the projector to cool down and then unplug it.
  3. On the bottom of the projector, loosen the two screws on the lamp cover and then remove the cover.
  4. Loosen the two screws on the lamp module and pull out the module.
  5. Insert the new lamp module and tighten the two screws.
  6. Install the cover and tighten the two screws.
  7. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp again.
  8. Press enter on the projector or on the remote control to open the on-screen menu.
  9. Press the up (c00589410.gif ) or down (c00589411.gif ) arrow to select Setup and then press the right (c00589412.gif ) arrow.
  10. Press the up (c00589410.gif ) or down (c00589411.gif ) arrow to select Reset lamp hours and then press enter .
Read full answer
Jun 18, 2008 • Dell 2300MP Multimedia Projector
0helpful
2answers

The lamp turns on for a second and you can see the vivitek logo on the screen then it goes dark
some projector are normal like what what you mention...you need to connect a video source like computer or sound system that have a video output going to your projector...because if you power on the projector with out a video source you see only what you mention the logo of the projector..
Read full answer
Mar 10, 2011 • Vivitek D510 Projector
0helpful
1answer

Projector goes out after two minutes IN72
Seems like some of the fans are not working well and it causes too much heat so machine shut itself. Check the fans if you can , sometimes they may stuck...
Otherwise go to a service...
Read full answer
Feb 28, 2010 • InFocus Office Equipment & Supplies
0helpful
1answer

MY TV HAS STARTED TURNING OFF AFTER A FEW SECONDS OF BEING ON FLASHING ALL THREE LIGHTS AFTER IT GOES OFF DOES THIS MEAN I NEED A NEW LAMP
tv repeatedly powers off repeatly during the first hour of use....what is the cause? is it the projection bulb?
Read full answer
Oct 22, 2009 • Samsung - Projection TV replacement lamp...
0helpful
2answers

New lamp turns on flashes 7 times
Just a thought...you *might* have a bad ballast in addition to that defective power supply.That flashing could be the ballast trying to ignite the lamp. A lamp is just like an enclosed welder's arc. The ballast generates a high-voltage spark to initially start the lamp, then low voltage with high current keeps it burning. If you look into the lens and see "lightning" flashes but no lamp ignition, that's what's happening. The ballast could've been damaged by the defective supply. Also, try a known-good lamp...just to rule out a defective new one--in the shop, we kept all old working lamps as testers.
Read full answer
Aug 30, 2009 • Sony XL-2100U Projector Lamp for...
1helpful
1answer

Projector fails to turn on
check your lamp. if it has bulges, black spots or fogging, replace it. otherwise, its your power supply/ballast.
Read full answer
Jul 15, 2009 • Office Equipment & Supplies
0helpful
1answer

Unit turns on for 20-30 seconds then powers off.....Please Help
it is the ballast issue,u can try one of the equivalent ones or just try & rework on the old one, perhaps one of the mosfets is leaky!!!!!!!!
Read full answer
Feb 06, 2009 • HP Digital Projector Vp6110 Multimedia...
0helpful
1answer

Panasonic PT L501u Replacement Lamp
panasonic projectors , even if the lamp has reached end of life gives u 10 minutes to reset the lamp counter
so when u replace a new lamp, go to options, lamp counter, reset & press stanby button for confirmation!
thats all the unit powers off & when u check the lamp counter , its shows 0
u r done!!!!!!
Read full answer
Jan 22, 2009 • Panasonic PT L501U Multimedia Projector
0helpful
1answer

Projector not working
I have the same problem with a HT250, red power light on back of projector will not come on. But if you leave the projector plugged in and power switch on it will light after some time and the projector works as normal. Any suggestion please email [email protected]
Read full answer
Apr 22, 2008 • SIM2 Televison & Video
Not finding what you are looking for?

View Most Popular

Domino D10 Home Theater Projector Projector

  • Office Equipment & Supplies

Related Question

Benq w1000 project not turning on

  • BenQ W10000 Projector

Related Topics

1,242 views

Ask a Question

Usually answered in minutes!

Popular Questions

How do you reset the

SIM2 DOMINO D80 DLP Projector

Sim2 domino 20

SIM2 Domino 20 Multimedia Projector

Replacing the lamp in SIM2 ht-200

SIM2 HT300 Multimedia Projector

Trying to update Firmware on a Sim2 HT300

SIM2 HT300 Multimedia Projector

How to reset lamp hours on Sim 2 Domino 18

SIM2 Office Equipment & Supplies

Check Out the Latest Printers Report
Check Out the Latest Printers Report

View all Fixya Reports

Top SIM2 Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66827 Answers

Are you a SIM2 Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...