Question about Toshiba 50H82 50" Rear Projection Television

1 Answer

I got a 50 inch TV and I cought my daughter banging on the TV screen and now there's no picture but the sound is good, please help

Posted by on

  • Wayne Holden May 11, 2010

    Please give more information. There are a lot of 50inch TV's.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 126 Answers

It damaged the crystals in the LCD Panel the only way to fix it to take it back to where u bought it and tell them the screen went out they more than likely will replace it

Posted on Sep 01, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My hisense 50 inch lcd tv has picture but no sound.


If you still have back light, then the T-con is probably defective. If you don't have back light, then you either have a bad power board/inverter or a defective panel

Mar 20, 2013 | Hisense Televison & Video

1 Answer

While watching, TV made a sharp bang sound. Sound still good, channels can be changed, but no screen, no raster


While watching, TV made a sharp bang sound. Sound Problem with the Zenith Z50PX2D 50 in. HDTV Plasma Television While watching, TV made a sharp bang sound. Sound still good, channels can be changed, but no screen, now tv wont come on at all?

Sep 26, 2010 | Zenith Z50PX2D 50 in. Plasma HDTV

2 Answers

Tv keeps turning on and off


You probably have blown capacitors on the PSB-power supply board. Recaping with new UF caps works 90% of the time. The set turns itself of into a fault protection to keep from damaging more components internally. A few bucks a soldering iron some solder should do the trick.

Jun 29, 2010 | Sanyo DP50747 50 in. Plasma TV

3 Answers

Picture covered with big block of black - 3/4 of the screen ???


It sounds like your tv may require a plasma panel, but to be sure remove the back of the tv unit and check the y-sus printed circuit board as well as the z-sus printed circuit board, check that they are getting the correct voltage and that there are no blown compoments on the boards themselves. The boards names, z-sus and y-sus are written on the board as well as the voltages are listed down the side of where the plugs at the boards meet. Good Luck. Oh , and also, check with LG that it doesnt require a software upgrade.

Dec 02, 2009 | LG 42PX5D 42 in. Plasma HDTV

3 Answers

50 inch samsung tv clicks on and off when turn on


the Fuse needs to be Replaces, contact nearest samsung service center. would cost just $1 trust me


email me if you need any assistance ... rajanetworking@gmail.com

Sep 02, 2009 | Samsung LN-S4051D 40 in. LCD Television

2 Answers

Phillips 50 inch Plasma


Philips 50 inch plasma tv no video but has sound

Sep 28, 2008 | Philips 50PFP5332D 50 in. Plasma...

4 Answers

VIORE LCD TV/DVD won't turn on


19 in wont turn on. red light just solid , unplugged for a day still same , is there a reset button

Aug 18, 2008 | Televison & Video

1 Answer

50 inch big screen


need model and make of unit

Apr 16, 2008 | Sony KV-32FS13 TV

1 Answer

1997 Toshiba 50 inch tv


Sounds as though you have a filter capacitor bad in the power supply. I strongly suggest you have it checked and repaired soon, before it burns up a transistor or regulator. The cost may be a bit high now, but will escalate to possibly a complete power supply board. If you can repair your own set, check the main power supply filter capacitors. Good luck. I hope this has helped.
Ed
NC Electronics
Mills, Wyoming

Feb 18, 2008 | Toshiba TP50G50 50" Rear Projection...

1 Answer

1/3 of picture becomes partially scrambled


sounds like you have a frame fold-over fault, does banging the tv have any effect (slightly bang the set on the sides), if it does then its more than likely a dry joint, check all around the frame output chip, hope this is of some help to you

Jun 02, 2007 | Sony KV-35S26 35" TV

Not finding what you are looking for?
Toshiba 50H82 50" Rear Projection Television Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...