Just replaced the motor control board, did one wash and now as soon as you startt the machine tries to fill with water but keeps stopping, gives one beep and then stops. I have set the board to suit the machine,
Help would be appreciated.
Ian
Hi mate
I had the same problem replaced the board still no go. In my case it turned out to be the drain pump. Nothing wrong with it but a small bit of grit that although difficult to see was impeding the impeller
chee3s
Pul
1,355 views
Usually answered in minutes!
I too just replaced the motor control board, and now as soon as
you start the machine tries to fill with water but keeps stopping,
gives one beep and then stops. I have set the board to suit the machine and have also installed a new drain pump - can't see how the new drain pump could fix a filling issue ??
Help would be appreciated.
×