When first turned on, the image is blurry/flickering on one side only. After 5-20 minutes (sometimes faster, sometimes not), the picture is perfect and stays perfect. We had the sat company out to see if it was the receiver. The tech said not - definitely the TV. Never had a Sony develop a problem like this so soon after purchase. Any ideas on what the specific bad part may be, cost of repair/replacement?
What I could recon from your question is that
your webcam driver is not installed in your PC.
Please be informed that
any Driver software depends upon the hardware make and Operating System. So, you
need to know all these information's to do get going.
Please find the Driver software's of your webcam
inside the installation disk provided with the System at the time of purchase. In
case if you do not posses the same then you need to download the
driver software from the web. As you have not mentioned your \
Operating System you are using, I am unable to give you the direct download
link. However you can download the same by visiting the website of the company
that manufactured the Webcam.http://www.vivotek.com/support/faq.php
Even here you need to be careful to download the
correct software for your PC. You need to be exact with the Webcam Model number
and the OS that you are using.
After you have downloaded the driver, to install just plug in the webcam on to
your PC and then Double click on the driver setup.exe file and go on clicking
'Next' until you get the 'Finish' option and restart the PC.
510 views
Usually answered in minutes!
×