Mitsubishi WS-65311 65" Rear Projection HDTV-Ready Television Logo

Related Topics:

Posted on Sep 07, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Color goes to blurry green and purple... tap set... sometimes it goes back.... When shut off for a while... works fine... for less and less time...

  • qualitycanva Sep 07, 2009

    Thanks Telly Head But that may be a little over my head... Oh... it is purple and green double vision BTW...
    A TV repair guy said (on the phone) that he thought it was a conversion chip(s) Wanted $100 to come out...$140 to Fix plus $125 for parts...

    So.. I give you the first $100 For what? LOL


    HELP!! I lOVE this TV!! I don't want a flat screen yet!! Thanks...and GOd Bless...

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Expert 59 Answers
  • Posted on Sep 07, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Aug 14, 2009
Answers
59
Questions
0
Helped
29602
Points
171

Sounds like there is a dry solder joint somewhere

look first on main pcb for bad connections.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer
1helpful
1answer
2helpful
1answer

I have a Sony KP-65XBR10W 65-inch HDTV - green flashes shut down

Most likely you have a Green CRT that is failing. Sony no longer stocks the CRT assemblies for most of the older Projection sets. Instead what is required is to send the Green CRT assembly back to Sony (minus the Delta Lens), so they can replace the Tube on the Optical Coupler. This is a major cost of about 400.00 to 500.00 for the CRT plus the the tear down and reassembly time. Then you need to do a major Convergence alignment because the other two CRTs are aligned to the Green CRT. Due to the cost and the fact that Sony will not be supporting the older sets much longer, I would not invest the money into it.
I hope this helps,
Skyassoc
0helpful
1answer

Screen is distorted with purple and green kind

your crts have gone bad.remove the front
cover and tap on the kneck of the red and green crt.if you see a change.crts are defective.
0helpful
1answer

Color Resolution

Sounds like a piture tube or internal video driver in your monitor. You probably lost the green channel. If the monitor is dated I would replace it.
7helpful
5answers

KP51ws500 turns green and shuts itslelf off

There may be several causes but, one is that when any color gun is being over driven, the Sony shuts down the gun to protect it. Try this. Remove the front of the set by removing the two screws from each lower corner. Next remove the black panel held on by 5 or 6 screws. Now you should see a panel with 6 potentiometers on it. Turning the ones on the bottom row CCW reduces the drive. Turn the color down and if all the guns stay lit, SLOWLY turn them up until you get the color balance that you like.
0helpful
1answer

Sudden color/picture distortion

you have a shorted green CRT that is affecting the other crts the short is internat to the crt that leaves what is called retrace lines. if the set is more than three years old then replace all three guns.
0helpful
2answers

Blurry on one side of screen. Green and purple shadows

Convergence IC's should be replaced before any alignment is
attempted ....part # STK392-560....You need two......mount
to large heatsink...............T.
0helpful
1answer

Sony 46" RPT color problems

Hello BlueKalel,

It looks like your green CRT is malfunctioning. You should try to see if the voltages are correct on the socket of the green CRT and check the high voltage on the green CRT using a high voltage probe. Use a schematic diagram to reference these voltages to.

I am positive that the problem is the green CRT or the circuitry leading to the green CRT. Please use caution when checking these voltages.

Thank you,
Shuttle83
1helpful
1answer

Bad color .

Turn the set on without an antenna, so there is only snow on the screen. Measure the 3 cathode voltages at the CRT, red green and blue. If the 3 voltages are about the same, around 175 volts, then the CRT is bad (purple picture means bad green gun). If the red and blue are around 175 and the green is over 200 volts, then there is a chassis problem, usually the video output transistor itself has gone bad or come loose.
Not finding what you are looking for?

140 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...