My remote control doesn't work for lg tv model # 37lc2d

Things to check: Make sure your TV is set to the correct input.
I DK about the light flashing 16 times but that could be a stuck key on your remote control. If you can, urn off your remote and try turning on by hand and going through the "INPUT" choices to make sure you have it on the correct setting. BTW, if your TV is 5 years old, you'll make the money back in no tie if you get a new "Energy Star" TV. The new Energy Star TVs run on very little electricity compared to 5 years ago.

I have an LG as well.
My troublshooing says:
"Check the power control setting.The power supply may be interupted.
Check if the Auto sleep feature is actiated in the Time settings.
Refer to the " Sleep timer".
If there is no signal while the TV is on, the TV will turn off automatically after 15 miutes or so"

Hi,Sounds like the TW box is the problem try swopping the box with a new one.
Good luck

You can purchase a cable to connect to the Audio Out ports on the back of the TV. It will have 2 RCA connectors on one side that plugs into the TV and a 1/4" stereo jack on the other end that you will connect your headphones to. You could even pickup a pair of wireless headphones... they will have a volume control on them! I hope this helps.

Try replacing batteries and reprogramming both remotes.

My LG plasma TV 50pc3d when power-on only see vertical bars. what 's going on. please help. Thank you

use a scart lead connected between your digital receiver to your tv

If this is an original remote u should not need a code. You need to find out if the remote is transmitting a signal. If it is a universal remote use your manual to find correct code, use code search or go on internet & look up code.

Have you tested the remote? Get a cheap IR reader card, Radio Shack used to have them, and test the remote. If it's working test or replace the IR detector in the Tv... If both of these are working you'll need a schematic and a logic probe to test the micro or you may need to replace the main cba P/N 33139d3029a
Good Luck!
Bill

I had the same problem with a LG42lf2500 I tried all codes that Virgin had listed none worked. I then started to program volume control stating at code 0001. 0007 worked for my LG TV LG42lf2500