I have an LG 50PX1D Plasma TV. The sound work fine however the picture is dark and fuzzy. Please advise what I can do to repair it. Thank you for your help
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You need to replace both the Y and X-sustain boards to light the tv. If the voltage is fine from the power supply then those are the only other boards related to lighting the plasma gas.
Either X,Y, or Z-boards seem to have developed a problem, when this happens it results in a 'sound-no-picture' condition. If its under warranty take it back, if not have your local tv repair center fix it for you....
Most likely what happened is one of the capacitors went bad. When a capacitors goes bad it produces a popping sound. This could be an easy and cheap fix if you find the bad capacitor or capacitors. The bad capacitor will have a bulging top most likely on the power board but could be anywhere.
Hi , I recently had the same problem which I was determined to fix . So I did a few weeks of research to find that it was the Y SUS board which burns out. I'm sure you realized that the TV gets hot. Personally I think this is why. circuit boards don't like heat and I've learned that the cooling fans are a joke. I replaced the board and got my picture back. I proved the fan theory because after the screen started to act up. I placed a cooling fan near the vent holes on top and the problem cleared right up,It also helps if you lower the brightness which helps out on the heat situation.I will soon be adding a fan with a temp. sensor. This shoud help if your screen has lines when you initially turn the cool TV on.then I have Some other costless solutions. Hope this helped these are great TV's and like our cars we maintain them not throw them away..................................Mr Wiseman
This problem can be a bad YSUS or bad ZSUS and I recommend replacing both. The part #s are 6871QYH039B and 6871QZH044C. These parts can be found at Andrews or Vance Baldwin.
×