Still dont know how to set mms/gprs to my sciphone i68+..

This instructable will show you how to easily set up the GPRS and MMS settings on your sciphone i68 so that you can send and recieve picture messages and surf the internet.

step 1 Go to nokia site You should see a screen like shown below. Scroll down and Click on the green [Download standard settings] button. Read the disclaimer and accept to continue.

step 2 You should click next until you see the screen shown below. Input the Phone Model as Nokia 2610 and click [next]

Step 3 The next screen will show three options as shown in the image.: WAP/GPRS, MMS, Internet We will need to complete this complete process three times all together, one for each of these settings, for now though; just select WAP/GPRS

step 4 On this screen select your country from the drop down list, I have selected Ireland but yours will vary, click [next]

step 5 Select your mobile network operator on this screen, I have selected 02, and yours may vary. click [next]

step 6 On the next screen you will be asked for your service provided, or in other words, whether your are on either a pre payed (speak easy on 02) or contract (bill pay) tariff. Enter your selection and click [next]

Step 7 Following this you will see a screen similar to that shown below. Enter the Security measure digits as shown in the image and enter your mobile phone number. Note the country code is included here and is very important . Typically you will drop the 0 from the beginning of your mobile number and simply add this to the country code number that is already present…

Step 8 Follow on until you reach this screen and: Make sure you take note of the pin number highlighted in red. When you receive this information by text message click the icon that appears on the sciphone screen to open then click [install] at the bottom left corner. You should be prompted for a pin, enter the pin that was noted in this step.

Dont forgate to rate it.....please...

im sorry you cant i also have a sciphone the only place it will propally work is china

but if you havent allready ring your service provider for the same info it will be unique to that network but if you go to internet, gprs is gone and it just wont come up there isint much hope

WAP

***First Step***
1.Main menu --> Select Services
3.Select Data Account --> Select GPRS
5.Select the first entry
6.Edit the account name to whatever you would like
7.Edit APN to wap.cingular (lowercase)
8.Edit Username to [email protected] (UPPERCASE)
9.Edit Password to CINGULAR1 (UPPERCASE)
10.Edit Auth Type. to Secure
11. Save

Select Back --> Select Back

***Second Step***

Select WAP
1.Select Settings --> Edit Profile
3.Select the first entry --> Edit Profile
5.edit the name to whatever you would like
6.Edit Homepage to http://device.home
7.Edit Data Account to the Name you established in the First Step
8.Edit Connection type to HTTP
9.The IP address is 066.209.011.032 and the port number is 8080
10.Edit Username to [email protected]
11.Edit Password to CINGULAR1
Select back or done
Select Activate Account


You should now see a Black [G] in the upper left of your screen.

MMS

Select Messages --> MMS --> Message Settings
Select Server Profile
Select the first entry
Select Edit Profile
Edit Rename Profile to whatever name you would like
Edit Home Page to http://mmsc.cingular.com
Edit Data Account to the same data account you created for WAP
Edit Connection Type to HTTP the IP address is 066.209.011.032 and the port is 8080
Edit the Username to [email protected] (UPPERCASE)
Edit the Password to CINGULAR1 (UPPERCASE)

Select Done or Save
Make sure to activate the profile and you are good.

*********************************************************************

There ya go I just got a sciphone a couple days ago and have AT&T I just set it up yesterday it works fine just takes a little time to mess with make sure you double check everything though if you have trouble.

These cect i68 sciphones are not GPRS compatible, they are GSM compatible, that means that when you want to get onto the internet you have to dial a network phone number. speak to your network supplier and ask them for the GSM telephone number then set that up in the wap gsm settings area in the phone menu.

Your Prepaid doesn't have Data Service... GPRS is the 3g network ... so if you dont have a Data Plan... or data service on your phone you can't go on the internet... and i bet if you could with a prepaid card... it would DRAIN your $$

WAP

***First Step***
1.Main menu --> Select Services
3.Select Data Account --> Select GPRS
5.Select the first entry
6.Edit the account name to whatever you would like
7.Edit APN to wap.cingular (lowercase)
8.Edit Username to [email protected] (UPPERCASE)
9.Edit Password to CINGULAR1 (UPPERCASE)
10.Edit Auth Type. to Secure
11. Save

Select Back --> Select Back

***Second Step***

Select WAP
1.Select Settings --> Edit Profile
3.Select the first entry --> Edit Profile
5.edit the name to whatever you would like
6.Edit Homepage to http://device.home
7.Edit Data Account to the Name you established in the First Step
8.Edit Connection type to HTTP
9.The IP address is 066.209.011.032 and the port number is 8080
10.Edit Username to [email protected]
11.Edit Password to CINGULAR1
Select back or done
Select Activate Account


You should now see a Black [G] in the upper left of your screen.

MMS

Select Messages --> MMS --> Message Settings
Select Server Profile
Select the first entry
Select Edit Profile
Edit Rename Profile to whatever name you would like
Edit Home Page to http://mmsc.cingular.com
Edit Data Account to the same data account you created for WAP
Edit Connection Type to HTTP the IP address is 066.209.011.032 and the port is 8080
Edit the Username to [email protected] (UPPERCASE)
Edit the Password to CINGULAR1 (UPPERCASE)

Select Done or Save
Make sure to activate the profile and you are good.

*********************************************************************

Just be Patient and make sure you double check everything you put it it has to be exactly as it says.. I just set mines up yesterday and it works fine.. Hope this helps! It took me forever to find the solution hah

hi there I have the same exact phone these are the exact settings I have on my phone.

first you will need to create your data account.

select services
select data account
select GPRS
select first entry
edit account name to ATT
press options then press done/ok
edit APN to wap.cingular
edit username to [email protected] (UPPERCASE)
EDIT PASSWORD TO CINGULAR1 (UPPERCASE)
AUTH TYPE TO SECURE THEN SELECT DONE AND SAVE.

NOW TO SETUP MMS SETTINGS

select mms then select mms settings
choose edit server profile or edit profile
select the sim card you are using

click edit profile
rename profile to ATT MMS
press options press ok
edit homepage to http://mmsc.cingular.com
edit data account and select ATT
select http and choose http ip address is 066.209.011.032 and the port is 8080
username is [email protected]
PASSWORD IS CINGULAR1

SELECT SAVE AND YOU ARE ALL SET, ENJOY YOUR PHONE.

http://three.wdsglobal.com/quicklink and i selected lg ku990 veiwty set settings to my phone then install all working planet 3 a little slow but working fine

yes the internet works but you will need to get a gprs/wap data plan. and you will need to get settings from your carrier

Centennial Wireless Internet And MMS Settings For The Iphone!!!!!!!

ALL SETTINGS WORK AND BEEN TESTED ENJOY...........

$$$$$ HACKED BY QWAZY $$$$$

INTERNET

APN = private.centennialwireless.com
USER = privuser
PASSWORD = priv

MMS

APN = mmspublicwap.centennialwireless.com
USERNAME = "LEAVE BLANK"
PASSWORD = "LEAVE BLANK"
MMSC = http://mms.myblue.com/servlets/mms
MMS PROXY = 063.099.231.135:8080
MMS MAX MESSAGE SIZE = "LEAVE BLANK"
MMS UA PROF URL = "LEAVE BLANK"