Hi, I have the activation code but can not put on my device because there is no space on the keypad on the touchscreen. thanks

touch the "Settings" icon, go down to the "Device" area, touch the "Storage" icon : go to the bottom of the screen, and select "Transfer data to SD card", then select the items you want to move.

You should also move some apps from internal storage to the SD card : "Settings", "Device", and touch "Applications" : then touch each and every application : for most of them, the button "Move to SD card" will be active, just proceed.

Hi and welcome to FixYa. I am Kelly.
This is a keypad problem. Most keypads can be replaced. Some are all in one control panel and keypad units. Without a model number I can not provide you with a source for a keypad / outer panel. I note you said "touchsreen" so it makes me wonder what Appliance we are discussing. Make and model number please and I will see how I can help with replacement parts or keypad testing steps.
Thanks,
Kelly

Welcome to FixYa!
To get the correct activation code of your GPS device, you have to contact your GPS manufacturer. If you have included the manufacturer of your GPS device in this post, I will be able to provide you with its contact details and steps to go about acquiring the correct activation code.
Thank you for using FixYa. Have a great day.
Jas247

Go to settings first, display and try to calibrate the screen

Follow the below mentioned steps to activate your device :
1
Connect your TomTom to your computer using its provided USB cable.
2
Press the "Yes" button on your TomTom's touchscreen when it asks if you'd like to connect your TomTom to your computer.
3
Open TomTom Home. Click "Start," choose "All Programs," find TomTom Home's folder and double-click its icon.
4
Click "Use my activation code."
5
Enter your activation code into the empty field next to "Your activation code."
6
Click "Next."
7
Wait while TomTom Home automatically uses the code your provided it.
In case of any further assistance please reply back.

Hello
There is no specific codes lited in its manual. You can search and find your devices' code by code search method.

Code Search

If the device you wish to control does not respond to any of the codes you

have entered using the Library Code Entry, you can search the entire code

library for a particular device that might not be listed in the Code List or

might be listed under a different brand.

When you enter a valid code for any given mode (e.g., when you enter a

code for a TV), the default key labels are displayed on the touchscreen and

any previously Learned functions for that mode are deleted. The mode is

reset to its power-on default state.
To search for a specific code in the Code List, follow these steps:

1. Manually turn on the device to be controlled (TV, VCR, DVD, etc.).

2. Press and hold the SETUP key on the rubber keypad until the LED

indicator light remains on and the touchscreen shows the Main Setup

Screen. This process takes approximately 2-3 seconds.

3. Release the SETUP key.

4. Press and release the LCD CODE key. The LED indicator light blinks

once to indicate acceptance of the keypress.

5. The touchscreen now shows the Device Setup Screen. Press and release

the device key on the rubber keypad for the device whose code you want

to enter (TV, VCR, SAT, etc.). The LED indicator light blinks once to indicate

acceptance of the keypress.

6. For AUX1 or AUX2, press the AUX device key. Select the desired device

key to be programmed under AUX (TV, VCR, SAT/CBL, etc.).

7. The touchscreen now shows the Code Setup Screen. Press and release the
LCD SEARCH key.

8. The touchscreen shows the Search Setup Screen. Press the ON•OFF key

on the rubber keypad repeatedly, until the device to be controlled

responds to the command and turns off.

Note: The Code Search starts from the currently stored code under that mode. For

example, if the device code list contains 100 codes and the currently stored code is

050, the Code Search starts from 051 and continues to 100 before looping back to

000 and finishing at 050. This speeds up the process of finding the correct code for

your device, since you may discover some codes can turn your device on and off

but are not able to control its other functions. This process allows you to
bypass codes you've already tried.

Hi,
The space key looks like a short "U", like this symbol ]turned so that long portion is down. It should be in the lower right corner of the keypad.
Please let me know if it helps.
Thanks

There isn't a way to disable the password of the BlackBerry device without actually knowing the password. Sorry. What will happen is if you enter the incorrect password 10 times the device will wipe itself, and clear the password. Of course, all data will be lost unless you have a backup of it.

Hmmm, and you did BUY that map through TT Home?

You could allways try here:
http://www.ttcode.com/

you have to make sure it is formated to FAT not FAT32

go to www.tomtom.com

click on support...