Looking for Craftsman Cordless Screwdriver Charging cord

replace it, the craftsman cordless tools are non repairable.

Sears com Try here.

If you can get it... try searspartsdirect.com

I would say that a output voltage of not more than 2.8 volt and the output amp should not exceed 60% of the Amp hour rating of the battery. Example if the battery is a 2000 mah battery the charging amp should not be more than 1400 milli amp or 1.4 amp

I took mine apart because it would not charge and the one terminal was very corroded but the battery is soldered to the terminals and no markings on the 2 batteries. Good Luck

you have a short in the battery or charger,,,very dangerous ,,the batt could explode

try wiggling the battery around and see if a light flashes

also look and see if a light flashes when you plug it in

i'm about 98% sure it's the charger

those unit were made for sears check there web site. the part number my tell you MFG of the unit. if not you'll have to buy it from sears