How to get tv to change channels when mash channel changer it says not available?

SOURCE: channel selection

What you need to do is take the remote, go into the menu, find channel scan and do a channel scan to find all the available stations available on this system. Make sure the TV set is in the cable mode and not antenna mode or you wont get any stations above channel 13.

SOURCE: Sanyo TV is stuck on Video screen

You need to get a universal remote with imput button on it. the imput button will control wether you want to use video or channels.

SOURCE: My JVC PIP Won't work, pls help!

I was told that in order to view 2 different channels at the same time u have to subscribe to SKYCable and use the digital input instead of the antenna input and the antenna input you will have to use the regular antenna since there is only one tuner in the TV

SOURCE: I can't change channels,message on TV says,'' no input available''.

Have you tried reprogramming the Dish remote with the Sharp code? That might bring back the TV control. Another option is to use the TV's control panel menu button (if available), go to the setup choices and have the TV scan for channels while the Dish receiver is on. It will find channel 3 then, and probably nothing else, so the set will stay on that channel.

SOURCE: Tv won't change channel

did you hook the tv up to the converter box or did you not add channels?