Use projector PC input 15-pin D-sub port. After booting signal pass to XVG VESA resolution 1360 x 768 then picture twisted, curved bad sync. Arcade machine sega Yellow Lindbergh video game computer If I use a LCD monitor instead of DLP projector image is good.
Consult the projector user guide for setup and adjustment. Look for a "Default" or "Restore default" option. Otherwise, manually follow the steps. to square up the picture.
Testimonial: "Very helpfull Press Menu 1- Go to Setup 2- PC setting 3- Clock phase +2 4- Sampling clock +15 Work great Thanks Gaucherre"
SOURCE: Dynex 19 LCD
I went over the specs of the TV.
The max input for the VGA is 1360x768 at 60Hz. Anything higher will make the TV go bonkers.
I would try to get the resolution at 1360x768, then change the frequency to 60Hz.
SOURCE: Video input won't accept signal.
if the video signal is HD, the projector can't read it.
Testimonial: "Thanks. Hopefully this will help others. Since the input was not HD, it didn't solve my issue, however."
SOURCE: Video input: 2 D-sub No signal /Video input 1 DVI-D No signal
Below is a link that may help you...Good luck http://www.techspot.com/vb/all/windows/t-35070-DVI-to-DVI--No-Signal-on-LCD.html
SOURCE: no signal for my lcd projector
Have you tried replacing the projector lamp? This company has all the lamps in the world: www.myprojectorlamps.com
48 views
Usually answered in minutes!
×