My treadmill has power but the belt wont turn or run at all. The power is on and you can hear the motor hissing and it sounds like if the belt wants to turn but it wont.

SOURCE: TV screen wont turn on but just a loud noise coming from the tv

i have a panasonic ct32sc13g flat screen tv 2003 model wont come on no lights will come on

SOURCE: treadmill powers up begins to turn belt then shuts down

Have you tried to calibrate the speed. If not you might want to try it and see if it will help you with your issue.

SOURCE: Proform 515s treadmill motor won't start

If the colse buttons make a chirping noise when you push them the console should be Ok. If there is no chirping noise with the push it is a bad console. If everything but the speed works it will probably be your motor controller that is bad.

SOURCE: Pro-Form Sport 1000 treadmill does not stop inclining

Do a Calibration on the treadmill. Take out the safety key. With 2 fingers, hold down the stop button and the speed up or spped plus button. keep holding them down as you insert the safety key, then let go of both.
Press the stop button 1 time, you should see all 0's in the windows, or EP 2P or something weird like that.
Press the Incline up button and then wait. If the incline go up until it stalls then down until it stalls the stops at the bottom, the you are recalibrated, take out the safery key and put it back in to see if all is well. If the incline takes off up again without touching a button, the you have wiring problems or control problems. Call service company to get it repaired.

SOURCE: i-run treadmill belt does not run

Maybe check the troubleshooting section of your manual. If you don t have one, check here.