Looking for code for LG BD 350- can anyone help!

Here is a possible solution for you:
http://www.avforums.com/threads/samsung-bd-d5500-multiregion-hack.1479678/
As with hacks like this, accept the risk that things may not work and you could end up with a non-functional player afterwards.

The Country Code is just related to the Subtitles etc and nothing to do with the Region.
Most DVD Players/Recorders are set to Play the Region of DVD from the Country they were purchased from. Only some are Region Free (will play DVDs from any Country) when purchased.

Some DVD Players/Recorders can be changed to Region Free by simply entering a code on the Remotes handset or by following instructions to enter a Service Menu and change it their.

Unfortunately yours can only be changed by updating the Firwmare which is a risky and difficult process even if you know what you're doing. I wouldn't advise anyone to try it without previous experience as you could render your DVD Player/Recorder useless.

Hi mwdiadem,
Make your player into "region free" so that it will play all kinds of disc. Region code hack for LG RC278 will work also to your model (RC388). Click the link below and follow the instructions.
LG-RC278/RC388 Region Code Hack
Hope I helped you.
Have a nice day!
Thanks for using Fixya.

Here is a solution: http://www.videohelp.com/dvdhacks/samsung-bd-c6900/10895

Please note, however, that even after region code hack, it may remain NTSC only, so if you are planning to play European DVDs recorded with PAL system, it may not work.

BD media does have region codes. But, unlike current DVD players, the region codes for BD media use letters instead of numbers to indicate a particular zone or region where the discs can be played.

The BD region codes are as follows:

• Region A: North America, South America, U.S. Territories, Japan, South Korea, Taiwan, and other areas of Southeast Asia
• Region B: Europe, Africa, Middle East, Australia, and New Zealand.
• Region C: Asia (except for Japan, Korea, Taiwan, and other areas of Southeast Asia)

Hi, kindly get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__re45f

You can only change this code 5 times before it locks out the CD ROM drive. If it's locked out, you will need a new CD ROM drive. Your best bet is to get two external CD ROM drives and set one to region 1 and the other to region 4. This way you don't have to keep buying CD ROM drives. :)

It's not possible to change the region code in the Blu-ray Player.

BD media does have region codes. But, unlike current DVD players, the region codes for BD media use letters instead of numbers to indicate a particular zone or region where the discs can be played.

The BD region codes are as follows:
Region A: North America, South America, U.S. Territories, Japan, South Korea, Taiwan, and other areas of Southeast Asia

Region B: Europe, Africa, Middle East, Australia, and New Zealand.

Region C: Asia (except for Japan, Korea, Taiwan, and other areas of Southeast Asia)

http://www.multi-region.net/lg_5931

I have a new BD-P1500, and after 5 Times

The trick seemed to be not holding the repeat key too long.

I have a Region B/4, running
090417_01_BDP1500_XAX.RUF
I used the R4 code from below.

1) Turn on the player with no disc in the tray
Wait till the unit is at the Samsung logo screen.
2) Open then close the tray, wait to see the No-Disc Message in the top Left Corner
3) Now press the REPEAT button on the remote, followed by a five digit code.
In this case Repeat 76884

Now it to me about 5 tries to get this to work, It needed to be done without delay.
So if you don’t get it to work straight away don’t loose heart.

4) When it works a 4 will appear in the top left corner

5) Press 9 to make it regionless.
6) Press Eject to OPEN to open the disc tray.
7) Press Eject to CLOSE to close the disc tray.

8) Power the unit off

9) Now power the unit on again, it should now read all regions of DVD Disc.

From other threads I got the follow list of region codes.

R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462




Report this hack (requests/questions/spam/wrong/****).-->
Region code hack posted by wasgo, September 17 2008:
I have tried the hack mentioned above on my new BD-1500 and couldn't make it work. But the software in it is about a month newer.
Does anybody have any new ideas how to solve the problem?
I have the region 2 version (Sweden)