WHATS MEANING OF ERROR C2831 IN KONIKA MINOLTA 6501

SOURCE: Driver utility of Konika Minolta Bizhub 162

Use the bizhub 180 same family

driver

SOURCE: konica minolta bizhup 6501 error c-2452

Something with your developer causing not enough toner. Maybe an auger issue in the developer or in the toner feed itself?

SOURCE: error code c-2833

CAUSE: LD Power becomes saturated when performing Auto Gamma adjustment in a low humidity condition.

SOLUTION: Perform the following adjustment:
1. [Utility].
2. [Machine Admin. Setting].
3. [System Setting].
4. [Expert Adjustment].
5. [Process Adjustment].
6. [Toner Quantity / Exposure].
7. Select the proper Exposure Adjustment [Yellow, Magenta, Cyan, or Black] by using the Next/Previous button.
8. Select Standard then select [-2] under Exposure.
9. Press OK.
Notes:
a. If the problem persists, replace the problem color drum since the cause of the SC is the combination of drum characteristic and humidity.
b. The following codes = colors: C-2831 = Yellow; C-2832 = Magenta; C-2833 = Cyan; C-2834 = Black.

Clive

• 4362 Answers
• Posted on Apr 28, 2010

SOURCE: konika minolta bizhub 350 Error c3451

Hi there.

Try this It could do the trick for you.

The error code c3451 refers to a copier warm up error; the machine had not reached the correct temp within a specific time.
I bet it happened when you first switched on one morning.
Easy to reset and fault usually goes away.

To Reset switch machine off using the switch inside the front door, not the one on the control panel.
Whilst holding the UTILITY key down on the control panel switch the machine back on keeping the UTILITY key held down. Eventually a Trouble reset key will be displayed in the LCD screen, touch this, OK will be displayed then power the machine off and then back on.

This will reset the error code, if the code reoccurs then there will be a problem with the fuser unit in the machine, and this will require replacing.

Hope it did work for you.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

SOURCE: HOW DO I SOLVE ERROR CODE C3451 IN KONIKA MINOLTA

You will need to replace the thermostat and the best solution is to ask a technician to do that.