Question about Toshiba E-studio 282 Copier-scanner-printer-fax
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
F103 indicates HDD transfer time-out.
U can try format the HDD (08-690).
Then u perform the bad sector check (08-694). *take long time
If the check result is OK, recover the data in the HDD. If
the check result is failed, replace the HDD.
* replacement of HDD require firmware update
Posted on Jul 02, 2009
C-430: Thermistor abnormality after abnormality judgment: Abnormality of the thermistor is detected after a specified period of time has passed from power-ON (including ready state).
You can try going into (08) mode by holding 0 and 8 while turning on the copier. Once the copier starts up key in 400 and press start, input "0" and press interrupt. Try rebooting the copier, if this doesn't clear that call for service then you are going to need to get work done on your fuser.
Posted on Aug 27, 2010
first off try firmware if that does not work it could be the exposure lamp faulty or the slg board (board under the metal plate in the optics cavity) faulty ro the inverter is faulty. but also make sure that the white strip under the glass is clean
Posted on Mar 08, 2011
Tips for a great answer:
Mar 28, 2017 | Toshiba E-Studio 282 estudio 282
Feb 06, 2014 | Toshiba Office Equipment & Supplies
Jan 02, 2012 | Toshiba e-Studio 232 Black and White...
Feb 22, 2011 | Office Equipment & Supplies
Jan 29, 2010 | Toshiba e-STUDIO 282 Black and White...
Jul 14, 2009 | Toshiba e-STUDIO 282 Black and White...
Jul 02, 2009 | Toshiba e-STUDIO 282 Black and White...
Oct 01, 2017 | Toshiba E-studio 282...
45 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: