Question about Simpson Washing Machines
Machine goes out of balance or vibrates excessively when
Make the machine level
Adjust feet to touch the floor
Redistribute clothes evenly.
Posted on Dec 15, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: I just bought my washer
When the washer shows error code E17 you need to turn the tap fully on and check that the supply hose is not bent or jammed up, next make sure the filter is clean. Then make sure the water pressure is not too low. After you do all that, run a load with no clothes in the washer and use one cup of white vinegar and the code will dissappear
Posted on Nov 19, 2009
It appears your timer/main controller/CCU has failed in this instance.
For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...
FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.
PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.
If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.
Anything too complicated or beyond your scope should be handled by a professional.
If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!
Posted on Sep 18, 2010
SOURCE: toploader kenmore elite oasis is
The F1 error code means that the computer thinks a button on the touchpad is stuck. Sometimes this can be resolved by making sure the touchpad connector fits tight into the control board. The F1 code can be cleared by pushing CANCEL/OFF. If it returns the touchpad needs to be replaced .
Posted on Aug 21, 2011
Tips for a great answer:
Nov 16, 2016 | Simpson Washing Machines
Apr 09, 2016 | Simpson Washing Machines
Feb 18, 2015 | Simpson Washing Machines
Jan 22, 2015 | Simpson Washing Machines
Sep 20, 2014 | Washing Machines
May 03, 2014 | Washing Machines
Feb 23, 2011 | Electrolux Washing Machines
Nov 19, 2009 | Bosch Washing Machines
Sep 20, 2008 | Washing Machines
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: