How to factory reset Kyocera M2540dw printer?

Hi,

Please use the pictures in your manual to locate and press the reset button in order to factory reset your laser printer.

You can verify this procedure on page 8-9 of the device manual.

Thank you.

just turn off authentication mode using admin login

you can open the command center of the printer, login using the password admin00. Then go to tab "Basic", click Reset and choose the last one, which says Reset Entire Device To Factory Defaults.
If you just want to reset the frpo parameters to factory defaults, then use the command !R! FRPO INIT; EXIT;

Looking to get rid of 'Install MK' message - any way that i can reset so i dont have to purchase a main kit?

printer is working but scanner is not working

You may contact Kyocera Technical Support Monday - Friday 9 am - 6 pm EST at:

1-800-255-6482, they should be able to assist you with this and there is no charge for the call or thier help.....totally free.

Your printer comes with a software CD. Run the CD there's an option to reset the printer.

Try to reset the printer.
Factory reset on Kyocera FS-3800 printer:
Connect the printer via paralell and type the following in at the command prompt:
ECHO !R! FRPO INIT; EXIT;

You probably have a network card called a IB-30 installed. You will need to reset this card by changing the jumper from is original position to the next one. This will restore the original factory settings, there are only one jumper on the card. If you still have the CD your IB-30 came with it will explain to you under troubleshooting how to restore the factory defaults.