How do I get the dvd out of the GE6823 as I put it in the wrong way I'm guessing? Cant find any way to eject it

my guess, no photos from you (our horror)
its NOT STOCK.
or the glove manual , is wrong, wrong year, or wrong page
the stock, cars have up to 3 audio system stock,
and the put all 3 in the book.
if not stock or wrong head there (was changed out)
then the real radio probably is in H3LL.

My first guess is that something is jammed inside and is triggering the eject mode.
Have you tried inserting and playing a disk?

I'm sorry that the disc tray is not ejecting. Please check whether you're able to locate a small hole under the tray opening area. If one available, please insert a pin and it will eject manually now..

Hi
Go to My computer, right click the cd/dvd writer, and choose 'Eject',
if it wasn't get out, so you need to use tall needle softly inject it in the hole near the cd/dvd writer light and press it inside softly, then the cd/dvd writer will be ejected.
Take care, use the needle carefully.

Please tell us your results
Good Luck

Buy youself agood dvd lenz cleaner. When it gets dirty it cant read the cd so it ejects it

how to use a vertical DVD drive.

so read the manual yet, page 23 (says only UK?) not sure why UK.


http://h10032.www1.hp.com/ctg/Manual/c01863412

omg the daft HP writer fails to say there.
my guess,,
it snaps in place.? i cant see close enough to tell.

Or ? to hold it with finger, next to hub of disk
push Eject (retract now) button and it sucks it in and pray
not jam.
it would have to be a special dvd driver there to work right.
in that vertical position
in the parts surfer for this PC no DVD drives listed, so i cant find the exact model. amazing fact and bad.


the only post at HP forum is the word INANE desigh
says put the PC layed flat to put the disk in.
wow.!\
as seen here

https://h30434.www3.hp.com/t5/Desktops-Archive-Read-Only/I-have-hp-pavilion-slimline-with-vertical-dvd-drive-Can-I/td-p/727097

or the bloke
that sold this use the wrong drive. and the hp parts list fails to show it, (wow2)

this page proves such drives (special ) work right.

https://superuser.com/questions/923546/how-can-an-optical-drive-function-when-mounted-vertically

eject the tray look here.
see the 3 spring loaded tabs here
yes good, no bad.

this is snap in drive, version

Hi,

I am guessing you had a disc in the drive when you took it apart (or maybe the coins had something to do with it).

What you need to do is disassemble the Bluray drive again. With the top cover off of the Bluray drive, power on the PS3, then hit the eject button. The plastic guides should snap into the right position and then you can reassemble and it will work again.

to eject the disc, turn off your TV and hold the eject button then power TV back on. Regarding the DVD feature not working, you may need to change the main board. If your TV is still in warranty, call 1-800-701-0680 for an in home service.

Apart from taking it apart! or forcing the disc tray out "DON'T" !!! try switching off at mains holding eject button continuosly pushed in and put mains back on, sometimes this causes a full "re-boot sequence" which from experiance and several attempts, does throw me the tray open!

My guess would be dirt on the rollers inside the VCR. They sesnse a jam and ejct. Try a VCR cleaner (with cleaning fluid) and see if that helps.