Question about Light Office Equipment & Supplies
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
First I would try fresh paper from an unopened ****. You could have moisture in the paper.
Some toners have a tape that has to be removed from the toner before installing into the machine. On the 7272 series machine there was a problem with the gears on the back of the developing unit wearing out and not adding toner. The machine would have made a loud grinding/gear skipping noise prior to failure. If this occurred the seals on the developer unit have gone bad leaking developer into the gears and ruining them. The developer and the developer unit will have to be replace.
Another possibility is the Transfer corona wire has broken or is dirty. Open the two front doors, lower the center lever and pull out the transport unit. A little the the left of center you will see some black paper guides, and under those guides are two channels. There should be two hair thin wires in one channel and one wire in the other channel. The single wire is the transfer wire. Make sure it is clean and not broken.
Posted on Jun 15, 2010
Normally light copy comes out when mirrors are dirty. Before any adjustment clean the slit glass and mirrors.
Posted on Dec 18, 2012
Tips for a great answer:
Feb 22, 2018 | Konica Minolta Office Equipment & Supplies
Mar 24, 2017 | Konica Minolta Bizhub 283 Copier / Printer...
Mar 22, 2017 | Konica Minolta Konica Bizhub 283 Copier,...
Apr 17, 2014 | Konica Minolta Bizhub 283 Copier
Nov 26, 2013 | Konica Minolta Bizhub 283 Copier
Mar 16, 2013 | Konica Minolta Konica Bizhub 283 Copier,...
Dec 17, 2012 | Konica Minolta Bizhub 362 Copier
Jul 11, 2012 | Minolta Office Equipment & Supplies
Aug 19, 2011 | Konica Minolta Bizhub 222 Black and White...
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: