At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If lock latch part is engaged, You can unlock it by using emergency key in ... Cards are programmed to function cards ... *1 When Hotel lock system is finished with all room settings, issue Setting cards ..... The most important card in system, the Master card can access all .... Then the lock will not work for its current Guest card.
Remove the SD card from the recorder and check if the write protection switch is in the locked position. Move it to the unlocked position and carefully replace it without toggling the switch. The switch is on the side of the card nearest the contacts but on the side without the angled notch.
Sometimes the lock switch can become damaged, the best thing to do in that case is to buy a new card. Since there is no data on the card, the time to make a temporary fix isn't worthwhile.
SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.
you should check out your sd card whether it has virus or not or you may try to format you card.I think it may help you.... if not let me know i'll give you other solutions.
There is a simple solution to that... You see under the 'card-tape' switch? There's the red button for recording... attached to that button the is a switch that says 'tandby or lock'.... if you have it in 'lock' it will not let you go to record mode, you have to change it back to 'standby' and that should solve your problem.... Anymore question just e-mail me at [email protected] and I was wondering if you had a copy of the installation CD I can buy or have.... or maybe you could tell me where to get it? Thanks.
Make sure all the files from the memory card have been downloaded and saved to the computer. You are going to need to format the memory card to remove the write protect/read only/lock issue. By formatting this will permanently erase all data from the memory card so you are able to use it again.
To format the card: go to Menu - to Submenu - to Format option - Start - then Start again - Press Menu to initiate the process - When done the recorder will be able to be used for recording purposes again.
If the card was edited via a computer the xD card becomes locked for protection purposes. Put the card in the recorder and format the recorder the lock will be gone. The device will show up as a removeable disk but gets moody if the memory is altered in any way by the computer.
×