I want to transfer my Tape recordings to the laptop hardrige
The camera has a setup selection to Connect with different sources, be sure you have selected DISP OUT to LCD. the USB (i.Link) output. Check the manual page 47, that has instructions on the procedure.
SOURCE: transfer recording from tape recorder to computer
Use a cable running from the headphone jack on the recorder into your PC microphone jack. Then you can capture the audio using Windows MovieMaker software that comes with Windows XP. I have done this and it worked perfectly.
SOURCE: cannot find sony usb cable to connect cam to pc
This problem has largely been answered by one of people posting the problem. Once the disk has been finalised in the camera remove it and insert it in the PC's DVD drive. If it "Autoruns" you will be asked what you want to do. If you have no third party video editing software on your machine select .....using Windows Movie Maker and "Import" the footage into that program. If the disk doesn't "Autorun" start WMM and import from your DVD drive (probably drive "D"). Use WMM's Help to find your way around.
SOURCE: Unable to use firewire Sony handycam DCR-HC 54E (mini DV)
I have a Sony Camcorder DCR-HC62E with same problem and found a workaround. The iLink seems not to be enabled in the camcorder except for only one of the working modes: setting PLAY/EDIT and then choosing STREAM. Once you get to this condition with the provided USB cable properly plugged at both ends, Windows recognizes a new device and asks for a driver, so you insert the provided Handicam Application Software disk and make Windows install it (I got a Windows message saying the driver is not safe but went on anyway).
Of course that in such a mode the Sony application "Import from Handycam (tape)" cannot and does not work, but using Microsoft Movie Maker and selecting File->Capture Video the camcorder is shown. Select it by clicking its icon and Next. On next screen Captured Video File define the required info and press Next. On next screen Video Setting select Best Quality.. and Next. On Captured Video screen be sure to have checked Create clips when wizzard finishes and proceed manually as follows: go to the beginning of the tape (or of the part you want to download) using the rewind/forward/play/stop controls in the camera. Once ready press Start Capture in Movie Maker and simultaneously Play in the camera, the filemed movie will show in the preview as it is played. When you're done stop camera play and press Stop Capture.
SOURCE: Sony DCR-DVD105 Transfer to Macbook
I have a firewire from sony 105 to macbook pro--DOES NOT WORK--adapter i used from Sony mini 7" dvd player -- thought I had it fixed :( old camera out of time....
SOURCE: i cant connect my sony
Hi,
Your sony DCR TRV 285E is not supported by windows 7.So you cannot use this in your computer.
Thank you
Testimonial: "no ways? i mean by any drivers or software"
178 views
Usually answered in minutes!
×