Is this Facebook support? All this seems too difficult for a straight forward support center.

Help Center
Your @facebook.com email is an optional email address for your Facebook account, and is based on your username. Email messages that are sent to your @facebook.com email address will be forwarded to the primary email on your Facebook account. Learn how to update your primary email.
Keep in mind that if you send a reply to these forwarded messages, it will come from your primary email address, even though the original message was sent to your Facebook email.
To enable or disable your Facebook email address:

1. Click > at the top right of any Facebook page and choose Settings
2. Click the Email section
3. Check or uncheck the box next to Use your Facebook email

good luck.

You can goto www.facebook.com
If you do not already have a facebook account you can sign up for one at no cost.
You will need an email address and a cell phone number in order to sign up for facebook.
The process is simple and straight forward once you start, but you can always ask for more help here if needed.
If you have a friend or family member that has a facebook account it may be easier to have them help you setup an account in case you have questioins or concerns.

it is very straight forward. if you need anymore help just ask.

Make sure the TV is set to VGA and not HDMI input or something else. Should be straight forward.

You can reset your password at https://www.facebook.com/recover.php The whole thing is pretty straight forward, and gets you back on facebook ASAP.

You have a bent steering rod or misalignment. Either way git down there by the steering wheels and check it out.....You must have hit something in your mowing dreams??????

there are several messenger in net.try chit chat...its better.or AIM messenger.

If your dryer is not covered by warranty, and if you don't want to hire someone to come out and fix it for you, it's not difficult to repair it yourself.

I could help you better if I knew the brand and the model of your dryer. But most dryers are similar, and - once you open it up - you'll see how easy and straight-forward it is to access & change the belt.

You will want to have some basic tools, and you may have to take the old belt to a hardware store (or Home Depot, or Lowes) to get the same-sized replacement.

Be sure to be careful of sharp metal edges while you're working around inside. I always seem to manage to cut or poke myself when I do this!

end links are straight forward, remove the old and install the new, sometimes you have some trouble if the ball end spins while removing the nut, look at the nut side of the joint and there is a hex key hole in the center to hold the joint still while removing the nut