Question about Fisher and Paykel Washing Machines

Open Question

Fisher and Paykel GW712 stop when it gets to the rinse cycle and after this draining water from the full to the quarter. Can you tell me please what do I need to do?

I checked the error code (from Google) and I think it is 5? From left to right there are two lights on 6th and 8th The pump and the drainage area were clean.

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
aborcass

Ron Coons

  • 2651 Answers

SOURCE: Fisher and Paykel Smart Dribe 608

not familliar with that exact model number ( we dont have that over here in the US) we have simalair f&p gwl10- gwl11) that problem sounds as if either the pump is bad and overheating before pumping all the water or a diverter valve is not fully closing allowing water to remain in tub.














Posted on Mar 29, 2008

Ad
Krazytech

Franklin Ouchida

  • 725 Answers

SOURCE: my fisher and paykel smartdrive

with no error code ... I would check you drain pump or drain hose... you first may want to try a shop vac connected to the end of a drain hose .. let me know if it helps

Posted on Dec 15, 2008

appldoctom

Thomas Malailua

  • 311 Answers

SOURCE: fisher paykel will not complete rinse spin cycle

will sence it will spin once the water is out .that must mean your pump is restricted.unplug go to buttom of washer find pump and clean out

Posted on Dec 31, 2008

BIKER T

Terence Fourie

  • 909 Answers

SOURCE: Fisher & Paykel washer GW712 won't spin

There is an issue with your drainage area. Best to remove the pump and check for the obstruction in the line or at the impellar.(If the water is not completely drained, the pressure switch wont send a low level to the timer to allow a spin).

Posted on Sep 14, 2009

Anonymous

  • 1 Answer

SOURCE: I have a fisher paykel ecosmart wash cycle but when

Tip the Washer and check the hoses.... my husband just found 2 pennies stuck in one of the hoses in my F&P GWL15

Posted on Oct 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Fisher & Paykel GW712 (approx 2003), will work up until the first orange rinse light. It does a small drain but then the 3rd, 6th & 8th lights come on (left to right) & it beeps continuously.


thats an error code for the drain pump, if it drains a bit of water then stops the drain pump is faulty (usually overheating coils from corrosion especially if you get a hot metal smell when it happens) dont keep doing it as it has tendency to blow the control board, you will need to replace the drain pump

Feb 04, 2017 | Fisher Washing Machines

1 Answer

My fisher & paykel washer will not move to rinse cycle


Fisher & Paykel GW712 AU 93200-A STOPS @ THE RINSE CYCLE & THE SPIN CYCLE?

Oct 12, 2011 | Fisher and Paykel IWL12 Top Load Washer

1 Answer

MY FISHER AND PAYEL GW 712 WASHING MEACHAINE IS NOT SPINNING AT ALL


I have a Fisher & Paykel GW712 and had same problem and fixed it today the drain pump motor had failed although it worked for 1 full cycle. when I tried to wash a second load the water would not completly clear from the machine I finally replaced the pump and now works correctly the pump is easy to install ensure machine is disconnected from power first

Mar 27, 2011 | Fisher and Paykel (IWL12)

1 Answer

Water not pumping out F&P GW712


If you can hear your pump running then your drain hose might be clogged, if not it is probably the pump and will need more in depth troubleshooting.

Oct 25, 2009 | Fisher Washing Machines

1 Answer

Fisher & Paykel washer GW712 won't spin


There is an issue with your drainage area. Best to remove the pump and check for the obstruction in the line or at the impellar.(If the water is not completely drained, the pressure switch wont send a low level to the timer to allow a spin).

Sep 14, 2009 | Fisher Washing Machines

1 Answer

Stops before rinse cycle... won't drain or spin.


The REGULAR CYCLE button turns the drain pump on or off. The REGULAR LED will turn
on when the pump is on. This feature can be used to drain the tub. You could get a bucket and lay the hose on the fllor. Gravity will drain it down.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Sep 07, 2009 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

My fisher and paykel smartdrive 708 stops at rinse/spin cycle with machine still full of water


with no error code ... I would check you drain pump or drain hose... you first may want to try a shop vac connected to the end of a drain hose .. let me know if it helps

Dec 15, 2008 | Fisher and Paykel Fisher Paykel Intuitive...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...