How do I program LG TV to show incoming calls

Why post a query concerning televisions in a forum dealing with Cameras ?

program ALL of the number,like,706-887-8888 ,not 887-8888

Tv have incomming broadcasting siganal cable problems,call ur cable or satalite provider check out the incomming broadcasting signal cable wire.

My LG Optimus will not receive incoming calls. Whenever someone tries to call my phone it is showing missed call onlyl. I can still receive all other alerts such as sms, mms, and e mail but my voice calls are not coming through. What to do

This tv have problems,the tv Tuner signal board, that the board,that take in the incomming broadcasting signal cable.This board,it dead.Call LG for the warrenty replacement of this board.

Phone settings then Display you should find caller ID on or off.

Programming is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wish to program ringing on. Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear only
press the Chng key till it says appear & ring
press next key (lower right arrow)
The display should say line 002: appear only
repeat the procedure the same as line 001 for the remaining ringing lines

press the release key when finished

Hi,probably the person who is calling you has activated CLIR (call line identification restriction) or you don't have CLIP (call line identification presentation).

Try looking for the program online

Don't worry, if you ignore it will grow :-)

It's a count of the unanswered calls with CID. If you take a spare button and program it for Call Log, it will light up and you press it to start the call log display.

Try this press PROG 54 STORE

When you press it, your display will now reveal the numbers under incoming.

If you put a number after the 54, it will log calls for a particular group. I get my calls on incoming group 100, so I store 54 100 under a button and I can see all system calls. I have a second button for just my extension calls.

Carl