Remote control not working,replaced battery - Televison & Video

There are a few things you can try to get your remote control working again:1. Check the batteries. If the batteries are low, they may not have enough power to operate the remote control. Try replacing the batteries with fresh ones.2. If the remote control still does not work, try resetting it. To reset the remote control, remove the batteries and press and hold the power button for 10 seconds.3. If the remote control still does not work, try connecting it to a different TV. Sometimes the remote control can become paired with a specific TV and will not work with other TVs.4. If the remote control still does not work, it may be defective and need to be replaced.

Hello, Desmond -

If you have owned the remote control for a while (years), the pads under the control keys used most often may be worn out. We had to have our remote controls replaced. They were the remote controls provided by our TV cable service. I telephoned the service number for our cable company and told the customer service representative the problem and he arranged for replacement remote controls to be delivered to us at no added cost.

Bottom line: You probably have to obtain a replacement remote control. Without knowing if the remote control came with your TV or if it is from a cable or satellite TV service, I can't direct you regarding obtaining a replacement remote control.

If there is no light coming on when pressing a button , the remote might need to be replaced.

Check the remote control for its infrared emission. Check it with fresh batteries. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience.
http://electronicshelponline.blogspot.com/
If remote control is working OK, check and replace the remote sensor inside the TV. Contact any service technician.

Check the remote control for its infrared emission. Check it with new batteries. Check the contacts of the battery connections in the battery compartment for any rust or dust accumulated. Clean then well before replacing the batteries. If the remote control do not work, just clean it and check. Check this to know how to clean and test a remote control. There is detailed description about it.

Hi.

Please test the TV using a programmable remote. If the TV works using the programmable remote buy a replacement remote control:

NEW POLAROID REMOTE CONTROL TDA-03211C TDX-01930B

Polaroid TDX01930B Replacement Remote Control

Polaroid Remote Controls

There is an internal component that has failed on the remote. Replace the remote and your issue will be solved.

Thanks for using Fix Ya.com.

Ur Lithium battery fully take in the charges,u recharges?Let the rmote sit without battery about couples hours.Put battery back in again,should work.

don,t know what your remote carries,sounds like your are putting the wrong batt. in it. most carry AA or AAA