At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
If you ve ever wondered how to contact Netflix with any problems questions or queries this article will show you how to get in touch with the on demand media streaming giant using...
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The series set you have has the power and main board as a combo and has had lots if failure issues so I'd try replacing this board, as long as your backlights stay on we can cross those off the list of possible issues
Check your advanced video settings for something like Environmental LIghting. There's a sensor on your television that reads the light in the room. It can adjust the brightness of your screen to accommodate more or less light. If you turn this off, it will help. You can also request support directly from your television. They will ask you a couple of questions, then setup a time to call you where they are very helpful and will walk you through any problems you are having. If it can't be fixed over the phone by tech support, they will setup an appointment for you to have it repaired. Hope this helps.
You have to check all the voltages, that comes from its main power supply board, to its back light inverter board. These is one pin at the backlight inverter board; comes from the main board; which controls the back-light inverter to start and off. This voltage is generated at the main board, and send to the back-light inverter board, as control voltage. It will be best to contact any service technician. If you wish to get some details; check the site linked here.Viewing it in "Mosaic" will make surf easy. http://electronicshelponline.blogspot.com/
Most likely you will need to get a diagnoses done on the set. It could be a faulty 24vdc circuit (power supply capacitors), defective inverter, or a failing CCFL backlamp.
×