Question about Samsung Televison & Video
When the TV is turned on, the Lamp light in front flashes about 5 times makes the chime noise. No picture or sound. I have checked all sources for sound or picture. I See the lamp light up and the fans running. The only sound is from the fans inside the set. I have replaced the DMD board, new oem lamp and color wheel. I checked to see if all cables were properly seated.both inside the cabinet and outside as well.The set will stay lit for a couple of minutes and shut down to Standby Mode. What have I missed? I've even unplugged the set overnight so I know a clean boot occurred.
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.
Posted on Dec 06, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I found a series of reference guides that really helped me with my Samsung DLP TV.
Posted on Mar 25, 2010
A black and white picture usually indicates the color wheel has failed or the DMD board has failed. Call 1-800-samsung to find neaREST SERVICE CENTER.
Posted on Jun 16, 2010
SOURCE: How do you change a
If you look at rear, you will get lamp cover on lower right side as left side has connection jacks, remove 4 screws of lamp cover, remove it, you will see lamp inside, remove it screw and pull lamp out from tv.
Put new lamp in place, tight its screw and put back lamp cover and tight its 4 screws, job is done.
Let me know if you have additional question.
Posted on Sep 16, 2010
SOURCE: There are shadows on the
The television have a problems known as a convergence problems,it is dead.Television have colors R,G,B lines miss alignments,have shadows pictures or 3D picture look alike?Yes the television convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts,must be replace on the tv convergence board to solved the television convergence picture problems.
Thanks for using fixya
Posted on Jul 01, 2011
Tips for a great answer:
May 29, 2017 | Samsung Hlr5667w 56-inch Dlp Hd Tv
Mar 31, 2013 | Samsung HLR5667W 56" Rear Projection HDTV
Aug 19, 2010 | Samsung HLR5667W 56" Rear Projection HDTV
Jun 16, 2010 | Samsung HLR5667W 56" Rear Projection HDTV
Feb 14, 2010 | Samsung HLR5667W 56" Rear Projection HDTV
Jan 03, 2010 | Samsung DLP HL-P4663W 46" Rear Projection...
Oct 22, 2009 | Samsung HLR5667W 56" Rear Projection HDTV
Sep 20, 2017 | Samsung HLR5667W 56" Rear Projection HDTV
Jan 20, 2008 | Samsung HLR5667W 56" Rear Projection HDTV
265 people viewed this question
Usually answered in minutes!