How to thread a whit #1810 machine? - Office Equipment & Supplies

Usually under spin reel covers have just a couple of course threads and theyou will unscrew.

Code 14 is for a problem with the exhaust cam sensor, code 16 is for a problem with the crank and cam sensor correlation.
Code 1810 is for a problem with a pressure switch, but it is usually inside the transmission and involves the torque converter.

Singer owns all the manuals now. Go to singer.com and click customer support and "instruction manuals" Then it's a simple matter of entering this "W1810"

The search brings up this manual.
http://www.singerco.com/uploads/download/1082_white-1475,-1810-x.pdf

Do you have a manual?
You can download a free manual from the singer site.
http://www.singerco.com/accessories/manuals.html
Just type in w1810 and click on search.
On the next page click on free download!
The manual will show you how to thread the machine.
Hope this helps!

PF means paper feed. When the machine attempts to pick and finds there is no paper the error appears.

check if the water is on, solenoid may be stuck or burned, may have jumped a thread(wire), the control of ice machine not activatinging the solenoid. if you have (and know to work whit it) a meter check if you have 220V (or 110V if you are in USA) or put a bulb whit soket instead the selenoid and turn on the icemaker, if the bulb wil light you must change the selenoid. or more simple, call a repair man, is more wise for a man who didn't know to work whit energy.

Suggest you contact an authorized Husqvarna Viking dealer. They can order you a user manual. Authorized dealers can be found at the Husqvarna Viking website - http://www.husqvarnaviking.com/us

Brief description of probably how to thread from looking at a picture of a Classica 90 machine which should be similar -

Thread sits on spindle on backside. Pull thread straight across to upper left backside and fit in the metal guide. It should pull easily with only a little resistance. Pull thread forward across top toward you. Let thread fall between the metal disks (doesn't matter which one if more than one) and pull thread straight down. Pull thread slightly to the left to fit under a hook of some type and back up to fit through the large hook that moves up and down when the handwheel is turned. Come straight back down to needle and thread through eye of the needle. Just above the needle should be a thread guide (sideways hooking looking metal piece), slip the thread through it to hold thread close to needle. Hope this helps. Otherwise a local authorized Husqvarna Viking dealer will be glad to help you. Good luck.

Jam code 70 means: No origional feed. Paper is detected on the doc feedr tray, but when the start button is pushed - the origional don't feed through.

I'm sorry, Copystar is not a brand I am familiar with.

Be blessed.