Hi,
THere was some problem, with the chat...I was not gettin gyour messages
1.Switch on the player
2; Pop open the CD compartment
3. Enter the following code (using the remote): 2812
4. Highlight the region
5. Change to 9 (for Multi-region) using the 'Enter' button
6. Hit 'Clear' to exit
7. Pop in a DVD and enjoy!
Switch on the player
2; Pop open the CD compartment
3. Enter the following code (using the remote): 2812
4. Highlight the region
5. Change to 9 (for Multi-region) using the 'Enter' button
6. Hit 'Clear' to exit
7. Pop in a DVD and enjoy!
THere was some problem, with the chat...I was not gettin gyour messages
Leave me comment, If it doent work..Ill give you some other codes..Ill solve your issue.Here
Even try this, if that doesnt work
With player off, press Display after Top Menu
After Clear and last On. Imediatelly your player appear Options : Choose number 2 , Drive Manual Operation; and after press 4 Tray Aging Mode. Put the CODE 24570 and confirm , go to second line and put 00000. Try 3 or 4 times , and when the 2 lines fix the numbers 00000, will be Ok , your player to use. I hope to help
Think there was some issue with the Fixya server...it wont be possible, But ill try to solve your issue here.....Have you tried both the steps...
Have you tried more than 3 to 4 time because, it should be tried till the lines get 0000
PLease leave me comment after trying the second step multiple times
DId any step solved your problem, PLease leave me comment as we chat..So im here will assist you immediately in solving your issue
I think your dvd would be unlocked,Please try playing other DVD region and comment whether it works
Is it working..Im still waiting for you r response
Give me a minute,Ill try to check the codes an d put again...Sorry for making you to wait..
The DVD HACK Guide says,SONY SRP DVD player containing the firmware of year 2008, cant be unlocked using the Remote code, You need special hardware hacking, Which can be only hacked by special hardware...
May i know, when did you purchased the DVD plyer, Is it older than 2008 or in or after 2008
Try doing the power cycle once by switching the player off and switching on again
Im very sorry sir, it contain some advance security mechanism, which cant be hacked normally..SO you need special harware to hack its region...ITs not that it cant be unlocked, it can be..But you have to take it to some DVD unlock center to do that...
IT cant be unlocked with that code..AS your device contains advance firmware
Thanks for using Fixya!, Hava a pleasant day!
As i gave you the solution, Please spend some time and please leave me good feedback for the chat session, Please
×
SOURCE: unlock region codes
Hi, Please get the code here :
www.dvdexploder.com/
www.download-info.com/dvd/index_new.htm
www.220-electronics.com/dvd/ht.htm
www.videohelp.com/dvdhacks
Jay__UNbhGvo
6,476 views
Usually answered in minutes!
didn`t work. After to enter with 2812 nothing happened. I`m not able to chat with you. Is it possible to reconnect ?
I had already tried both procedures. The second one was working until the step "Try 3 or 4 times. I tried much more than this and nothing happened. I never got both lines with 00000
I had already tried both procedures. The second one was working until the step "Try 3 or 4 times. I tried much more than this and nothing happened. I never got both lines with 00000
When I fill the first line with the code 24570 and I confirm, automaticaly goes to 2nd line and it´s already filled with 00000. My doubt is what do after this. I pressed 0 and got back to the main menu. Then I pressed 2 and 4 again to go to the same place. I filled again with 24570 and confirmed. Go to the second line that is already filled with 00000. And so on. Tried this way more than 10 times. Not sure I´m doing the right thing
When I fill the first line with the code 24570 and I confirm, automaticaly goes to 2nd line and it´s already filled with 00000. My doubt is what do after this. I pressed 0 and got back to the main menu. Then I pressed 2 and 4 again to go to the same place. I filled again with 24570 and confirmed. Go to the second line that is already filled with 00000. And so on. Tried this way more than 10 times. Not sure I´m doing the right thing
I tried other region and it is still locked.
no. not working for other regions
no. not working for other regions
no. not working for other regions
I bought one month ago. The firmware main version is 1.005 :(
I bought one month ago. The firmware main version is 1.005 :(
still not working.
ok. thanks. :(
ok. thanks. :(
Sony dvp sr320 dvd player working but open not working then display locked how to unlock?
×