Question about Exercise & Fitness

2 Answers

725T Plus treadmill has intermittent rattle when in use.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 56 Answers

Most likely the drive motor.

Remove the hood to investigate. Should be able to feel it by touching the motor when in operation.

Posted on Jan 12, 2020

Ad

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My dx4 drone usb charger won't light up

Posted on Jan 11, 2020

Ad

6 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

ucraft-tech

  • 20 Answers

SOURCE: Merit 725t treadmill turns on but the motor is

THIS SOUNDS LIKE A DEAD MOTOR, TRY TROUBLESHOOTING THE MOTOR BY REMOVING THE MOTOR COVER AND REMOVING THE BELTS FROM THE MOTOR THEN TRY COMMANDING THE MOTOR TO ROTATE (USING THE CONTROL BOARD) IF IT STILL SLOACHES THEN THE MOTOR IS INDEED DEFFECTIVE.

Posted on Apr 09, 2011

raysingh

  • 2 Answers

SOURCE: Merit 725T. The treadmill has

Merit 725T. The treadmill has gone into a "10 degree" incline mode on its own, and will not respond to the control panel

Posted on Jun 16, 2011

ercupa190

ernesto cuadra

  • 12223 Answers

SOURCE: Model Pro Form 725T Treadmill We lost the key

Dear Sir:

Hello, I hope everything is right.

The best way is to buy the key from:

www.proform.com/ this is the web from the page, for your Treadmill.

The another way is to bridge the key, but I do not recommend you, since this Treadmill is very Complex equipment( computer equipment) If you do not have Experience in Electronic and Electricity you can damage the equipment.

If you need further assistance, please reach me.

sincerely. God bless you.

E.CUADRA
MANAGUA, NICARAGUA.C.A.

Posted on Oct 13, 2011

ercupa190

ernesto cuadra

  • 12223 Answers

SOURCE: does the belt need to be oil merit treadmill 725t

LUBE THE DECK BELT, this produce shut down by lack of maintenance in according with the instruction manual. Maybe you have a deck belt worn.

2) Lube the rollers bearing too in according with the instruction manual.

3) Test the drive belt, and see if need replace or adjust .

sincerely. God bless you.

Posted on May 08, 2012

ercupa190

ernesto cuadra

  • 12223 Answers

SOURCE: how to calibrate merit 725T plus treadmill

please follow this steps and fix it. God bless you

The Steps for Newer Style Console Calibration:

  1. Locate the calibration area on the rear or underside of the console (a hole, near the console's center, that goes through to the electronics board. (This hole should not have a screw in it.)

  2. Insert a pencil (eraser end), into the hole and feel around for the cal button (will click when pressed).

  3. Press the button 2 times (with the pencil eraser). The first click should show CL11 in the console, the second click should show CL21.

  4. If the process was done correctly, and CL21 appears in the console, you are in "calibration mode." The next few steps consists of pressing buttons on the console and observing settings. This will not require any other tools.

  5. Press ENTER. CL22 should display in the TIME window and (??) in the SPEED window.

  6. Press ENTER. CL23 should display in the TIME window and (??) in the SPEED window.

  7. Press ENTER. CL24 should display in the TIME window and (??) in the SPEED window.

  8. Press ENTER. CL25 should display in the TIME window and (??) in the SPEED window.

  9. Press ENTER. CL26 should display in the TIME window. You should then see the letter "E."

  10. Press ENTER. You should see "SS" or "55" in the console.

  11. Push the STOP/START button. For safety, at this point, you should step off, or be off, the treadmill.

  12. Push the ENTER button. The walking belt should start to move, accelerate to maximum speed, then stop on its own.

  13. When the belt stops, the incline should self test by raising to its highest incline position, then lowering back down to its lowest position.

  14. Once the incline test is complete, push the POWER button 2 times. The unit should shut off and the console should go completely blank. If this happens, the treadmill is done calibrating and is ready for use.

  15. If the letter "F" appears in the SPEED or INCLINE window when the power button is pressed 2 times, the treadmill is indicating a failure somewhere either in the SPEED or INCLINE (depending on the window the "F" appeared in). Troubleshooting the failure would be the next step.

Posted on Dec 15, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Safety key


Check here for guidance on how replace or repair your safety key:
http://www.partsfortreadmill.com/parts-for-treadmill/treadmill-safety-key/
http://www.treadmillsrepair.co.uk/2014/08/treadmill-safety-key.html

Jul 22, 2013 | Merit Fitness 725T Treadmill

1 Answer

Incline


Run the software calibration for easy diagnostic, and fix it.

God bless you

Jul 03, 2013 | Merit Fitness 725T Plus Treadmill

1 Answer

Merit 725t treadmill turns on but the motor is struggling with no weight on the machine


THIS SOUNDS LIKE A DEAD MOTOR, TRY TROUBLESHOOTING THE MOTOR BY REMOVING THE MOTOR COVER AND REMOVING THE BELTS FROM THE MOTOR THEN TRY COMMANDING THE MOTOR TO ROTATE (USING THE CONTROL BOARD) IF IT STILL SLOACHES THEN THE MOTOR IS INDEED DEFFECTIVE.

Feb 05, 2011 | Horizon Fitness Merit Fitness 725T...

1 Answer

I have a Horizon fitness CST3 and the belt stops running but everything else stays on. Do you know what is cuasing my problem?


How old is your treadmill? Has the deck been lubricated? Do you smell anything odd when the belt stops? Unplug treadmill, remove motor cover and check cables are all connected.

Oct 23, 2010 | Horizon Fitness Merit Fitness 725T...

1 Answer

Merit 725T. The treadmill has gone into a "10 degree" incline mode on its own, and will not respond to the control panel to reduce the incline.


Merit 725T. The treadmill has gone into a "10 degree" incline mode on its own, and will not respond to the control panel

Sep 21, 2010 | Horizon Fitness Merit Fitness 725T...

2 Answers

The treadmill powers up but the belt will not work


the motor controller has failed and will need replaced

Aug 01, 2010 | Horizon Fitness Merit Fitness 725T...

1 Answer

The treadmill is throwing the breaker in the electrical panel box


Your unit has a direct short in the lower electronics call Merit @ 877-50-Merit

Apr 23, 2010 | Horizon Fitness Merit Fitness 725T...

1 Answer

Treadmill stopped and lights started blinking and beeping sounds started


Sounds like the safety tether is not making contact with the switch make sure it firmly in place. Sometimes these switches will mis-align then the upper console would have to be removed usually held on by phillips screws and can be seen out of place

Mar 09, 2010 | Horizon Fitness Merit Fitness 725T...

Not finding what you are looking for?
Exercise & Fitness Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Exercise & Fitness Experts

Treadmill Repairs...
Treadmill Repairs...

Level 2 Expert

338 Answers

Tom Chichester

Level 3 Expert

55370 Answers

ray gallant

Level 3 Expert

66484 Answers

Are you an Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...