Need chart verification for torque and bolt for 6068 john deere

SOURCE: Lost the bolt/nut to my riding lawn mower!

That is a cap screw you are talking about. The size of it is 7/16" X 1-3/4". The John Deere part # is 19H2563, but I am sure you can just get one at the local hardware store. I could not find out for sure, but on most blades they use a fine-thread bolt/screw. If you can tell the difference, check before you buy, or just buy both and see which one threads in easily. Hope all this helps.

SOURCE: i need a john deere X360 44" front blade

you can buy it on ebay right now!
here's the link: http://cgi.ebay.com/John-Deere-44-Blade-X300-X304-X320-X324-X340-Ops-Manual_W0QQitemZ120402528023QQcmdZViewItemQQimsxZ20090406?IMSfp=TL090406151008r17840

SOURCE: Hello, does anybody know the torque setting for

I found the tech manual one lin but it can"t be opened since deere is updating it.I will see if we have the book"tm1974" at the dealership in the morning and get back to you.

Bill Linda Rivard

• 197 Answers
• Posted on Nov 14, 2009

SOURCE: I have a John Deere LT 1`33 lawn tractor with a 13

I believe they are 8mmX35mm.

Bill Linda Rivard

• 197 Answers
• Posted on Feb 09, 2010

SOURCE: torque spec on a 425 john deere head

Initial torque-115 inch pounds,final torque-186 inch pounds.Intake manifold is 53 inch pounds on all 8 screws.Valves set at 0.010 on all 4.If you go with the new style valve cover gasket {the flat one} be sure to leave the old o-ring in valve cover to keep the new gasket from splitting.