Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
https://homehol.blogspot.com/
SOURCE: sanyo tv codes
The codes listed by Sanyo for my TV won't work in my star Choice remote.
I tried 017 021 039 056 057 058 and 140 as listed by Sanyo.
Any ideas?
SOURCE: I need to program ge universal remote jc024 for
I also lost the manual for my GE JC024 Universal Remote. I remembered though that you just hold in the button for the device you want to program and the "SETUP" button at the same time for about 5 seconds until the red light on the remote flashes and stays lit. then let go of the buttons.Then you basically just press and let go of the on/off button, pausing for a second or two in between presses until your device turns off. then you have to press the "ENTER" button and it'll store the code for that device. This method just cycles thru all of the possible codes for that device. sometimes you get the wrong code and the remote wont completely work. like hitting the volume button makes the tv mute for example. just repeat the steps until the device turns off again and eventually you should be able to get it. hope this helps.
SOURCE: i have a ge 24911 universal remote how can i setup
Please rate this solution if you find it helpful. Thanks.
These are the codes for Sanyo TVs:
0049 0097 0110 0004 0268 0012 0108 0180
If you need any further codes, you can download the full list from here (free):
http://www.jascoproducts.com/support/download-files/RemoteCode-4-digit.pdf
Also, if you need any instructions for programming your remote you can download the manual here:
http://www.jascoproducts.com/support/manual-downloads/applications/DocumentLibraryManager/upload/24912-Manual-Eng-Spa.pdf
Hope this helps.
SOURCE: GE universal remote code for sanyo tv?
Hello
Three digit universal remote codes for Sanyo TV with GE remote are:
049/097/110/004/268/012/108/109
/ 013/ 180/ 209
Four digit universal remote codes for Sanyo TV are
0049 0097 0110 0004 0268 0012 0108 0180
OK
163 views
Usually answered in minutes!
×