SOURCE: Logitech wireless mouse and keyboard
Normal
0
Press the Receiver button (and the lights will start
flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT
button on the back of the board to connect the keyboard to the
receiver.
If the MOUSE isn’t working, push the small RESET/CONNECT button
on the back of the mouse to connect to the receiver. Then they
should work okay.
Hope this helps. Bud
SOURCE: Logitech Wireless CE 0682 Keyboard won't work but mouse does
did this come with software
and you might need to do a uninstall reinstall
if it worked on same pc before it should work now.
if you have a reset button on transmitter try resetting it.
SOURCE: Logitech mouse n keyboard wont connect
whenever you chage the battery you have to syncnonize your keyboard and mouse to sensor of the reciver. you can see on the back side of the keyboard there is connect button just press it and on the recevre side also press the connect buton same setting do with mouse also.
SOURCE: logitech wireless optical mouse won't move computer cursor
Sometimes on wireless mice the contacts get warped or bent, so when you move it or set it down the batteries are not making full contact on both ends and the mouse loses power.
You can try adjusting the contacts or using a conductive material to make the contact (like a staple or paperclip), but you're probably better off spending the $10 or $20 to get a new mouse.
139 views
Usually answered in minutes!
NO PC told.
it is a bad mouse or lost receiver
batteries backwards. (plus end to rear )
new batteries read 1v not 1.5 and are bad.
the moust on/off slide to "ON" next.
RTM yet, read the manual
is the USB receiver missing?
in the mouse battery compartment is the
USB nano receiver, lose that?
https://support.logi.com/hc/en-us/articl...
try all usb ports on the unstated PC?
for the nano.
×